$10.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you run a Redding Case Neck Gauge or the Universal Flash Hole Deburring Tool, the right pilot stop is what keeps your measurements honest and your prep consistent. This is the .30 caliber version, machined from stainless steel and sized to seat on the standard 3/16" mandrel. It drops into your setup and indexes your brass the same way every single time, which is exactly what you want when you are chasing tight tolerances.
The whole point of a pilot stop is to locate the case cleanly so the gauge or deburring tool reads from a true reference. This one is CNC machined for a precise fit against new and resized case necks, so it sits where it should without any slop. Redding designed the stop with a slightly undercut profile, and that shape is the clever part. It won't grab imperfections at the case mouth or the neck and shoulder junction, so your dial indicator gives you a smooth, accurate reading instead of chasing a burr or a ding.
This stop fits the standard 3/16" mandrel used across much of the Redding system. It pairs with the Case Neck Gauge for sorting brass by neck wall thickness and uniformity, and it works with the Universal Flash Hole Deburring Tool for controlling cutting depth. The larger 3/16" size also plays well with case prep tools from other makers, so it isn't locked to one brand of gear. Worth noting, this is the .30 caliber stop specifically, so if you are loading .22, 6mm, 6.5mm, or something else, you will want the matching size for that neck.
For anyone building out a precision reloading setup, having the correct caliber pilot stop on hand is one of those small details that separates consistent ammo from frustrating guesswork. It is a simple, well-made part that earns its keep every time you prep a batch of .308, .30-06, or any other thirty cal brass.
It is designed for use with the Redding Case Neck Gauge and the Universal Flash Hole Deburring Tool. The stop indexes your .30 caliber brass so the gauge or cutter references off a clean, consistent point. Because it uses the standard 3/16" mandrel, it also works with case prep tools from other manufacturers.
The slightly undercut profile keeps the stop from picking up imperfections at the case mouth or the neck and shoulder junction. That means your dial indicator gives smooth, accurate readings instead of reacting to a burr or a minor ding. It is a small design detail that makes a real difference in measurement consistency.
No, this is the .30 caliber version specifically, so it is sized for thirty cal necks like .308 and .30-06. Redding makes separate pilot stops for other calibers, so you will need the matching size for .22, 6mm, 6.5mm, and so on. Pilot stops are required for each caliber you plan to measure or prep.
The Redding Case Neck Gauge and the Universal Flash Hole Deburring Tool typically ship with the .22 and .30 caliber stops. Buying this one separately is handy as a replacement or if you want a dedicated stop so you aren't swapping parts between tools. It is also useful if you picked up a tool secondhand without all the original pieces.
| UPC | 611760061301 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 06130 |
| Caliber/Gauge | .30 Caliber |
You must be logged in to post a review.
Reviews
There are no reviews yet.