L.E. Wilson 30 BR Bushing Full Length Sizing Die | FLD-30BR

Description

The L.E. Wilson 30 BR Bushing Full Length Sizing Die is built for benchrest reloaders who want real control over how their brass comes out of the press. Instead of relying on an expander ball to set neck tension, this die uses interchangeable bushings so you can dial in exactly how much grip you want on the bullet while sizing the case body and bumping the shoulder back at the same time. That combination of precision and simplicity is why Wilson dies have earned such a strong following among the accuracy crowd.

What makes this one worth a look is how little it works your brass. The bushing system keeps neck resizing to the bare minimum, which cuts down on the overworking that shortens case life. These full length dies use the same bushings as Wilson's neck sizing dies, and they're designed to leave about 3/16 of an inch at the bottom of the neck unsized, a trick a lot of precision loaders swear by for better consistency.

What the 30 BR Bushing Die Does on the Bench

In a single stroke, this die sizes the case body, sets the shoulder back for correct headspace, resizes the neck to your chosen bushing, and deprimes the spent primer. It comes with an adjustable depth decapping rod plus a spare decapping punch, so you can fine-tune pin depth and keep a backup on hand. Keep in mind there's no expander in this design, which is exactly the point, and the neck bushings are sold separately so you can match tension to your brass and bullet.

Build Quality You Can Count On With the FLD-30BR

Wilson machines this die from high quality heat treated steel that's hardened to their own spec, which they rate as harder than a Grade 8 bolt. Stainless parts help it hold up over years of use, and the standard 7/8-14 threads mean it drops right into most common single stage presses. Made in the U.S.A., it's the kind of tool that earns a permanent spot on your loading bench for 30 BR.