Description
If you handload for the old 30-40 Krag, you already know consistent seating depth is where a lot of your accuracy lives. This Lee Precision Micrometer Bullet Seating Die gives you a way to adjust that depth in clear, repeatable .001 inch steps, so you can experiment with your loads and return to a proven setting without guesswork. It's a single seating die built to work in any standard 7/8-14 press, chambered specifically for the .30-40 Krag (.30 U.S.).
What Sets This 30-40 Krag Seating Die Apart
The heart of this die is the floating bullet guide. It holds the case mouth and bullet in alignment as the bullet goes in, which keeps runout down and sends your bullets in straight. The seating stem is machined and burnished to handle nearly any bullet nose shape without leaving marks, so your polished match bullets or soft points come out looking as good as they went in. The micrometer head reads just like a depth micrometer, with laser-engraved divisions and smooth travel, no detent clicks to fight.
Dead Length Seating and a Handy Crimp Trick
Run as a dead length seater, the die body contacts the shell holder so every round gets the same uniform seating depth. That contact is what gives you the consistency the Krag's rimmed cases reward. There's also a nice touch here: the floating bullet guide is reversible. Unthread it, flip it, and reinstall to seat and crimp in a single stroke if that's how you prefer to run your bench. It's a feature you don't usually find at this price point.
The .30-40 Krag is a round with real history and a loyal following, and it tends to shine with careful handloads. A seating die that locks in your settings and keeps bullets straight is exactly the kind of upgrade that pays off downrange. Whether you're loading for an old service rifle or a sporterized Krag, this one belongs on the bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92275
- UPC: 734307922757
- Cartridge: 30-40 Krag (.30 U.S.)
- Die Type: Precision Micrometer Bullet Seating Die
- Adjustment: Micrometer, .001 inch divisions
- Bullet Guide: Floating, reversible for seat-and-crimp
- Seating Stem: Machined and burnished for mark-free seating
- Thread: 7/8-14 standard press
- Country of Origin: Made in the USA
What’s Included
- Lee Precision 30-40 Krag Micrometer Precision Bullet Seating Die
Frequently Asked Questions
Is this 30-40 Krag die a complete die set or a single seating die?
This is a single bullet seating die, not a full set. It covers the seating step only, so you'll still need a sizing die and shell holder if you don't already have them. If you want everything together, Lee also offers a full-length die set for the 30-40 Krag.
What does the micrometer adjustment actually do for me?
The laser-engraved micrometer head lets you set seating depth in precise .001 inch increments and read it just like a depth micrometer. That means you can test different seating depths and return to your best setting exactly, without any trial and error. It's a big help when you're chasing the most accurate load for your rifle.
Can this die seat and crimp at the same time?
Yes. The floating bullet guide is reversible, so you simply unthread it, flip it, and reinstall to seat and crimp in one operation. Many reloaders prefer to keep seating and crimping as separate steps for the finest accuracy, but it's nice to have the option built in.
Will this die work with my standard reloading press?
It uses the common 7/8-14 thread, so it fits standard single-stage and turret presses from Lee and other major brands. You'll want the correct shell holder for the 30-40 Krag's rimmed case to run it. Beyond that, it drops right into your existing setup.





Reviews
There are no reviews yet.