Description
Full length sizing is the foundation of good rifle brass, and the Redding 91148 handles it for your 30-06 Springfield. In one stroke it works the entire case back down to SAAMI spec, bumps the shoulder as needed, and sizes the neck while the decapping rod punches out the old primer. The result is brass that chambers reliably round after round, which is exactly what you want whether you're loading for a bolt gun, a semi-auto, or that old Garand.
What Sets the Redding 91148 Sizing Die Apart
Redding builds these on precision lathes to tight tolerances, then heat treats and hand polishes the sizing surfaces for smooth travel and reduced effort on the press handle. The die contains a decapping rod assembly with a neck expander, or size button, so the neck gets opened back up to the right inside diameter for proper bullet grip as the case is pulled out. It's the kind of fit and finish that handloaders who care about consistency have trusted from Redding for a long time.
Fitting the 30-06 Full Length Die to Your Press
This is a single full length sizing die, not a complete set, and it uses the industry standard 7/8-14 threaded body that fits virtually any single stage or progressive press on the market. You'll need a shell holder sized for the 30-06 case head along with your usual case lube to run it. Pair it with a seating die and you've got everything needed to turn once-fired brass into fresh, dependable 30-06 ammunition.
Why 30-06 Shooters Reach for Redding
The 30-06 is one of the most loaded rifle cartridges around, and brass life matters when you're feeding a cartridge you shoot often. Sizing with a quality die keeps your cases uniform and extends how many times you can reuse them. Made in the USA and built to last a lifetime of reloading, the 91148 earns its spot on the bench.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 91148
- UPC: 611760911484
- Caliber: .30-06 Springfield
- Die Type: Full Length Sizing Die
- Die Style: Conventional (bottleneck)
- Thread Size: 7/8-14 (industry standard)
- Material: Heat treated steel, hand polished
- Surface Hardness: Rc 60-62
- Includes Decapping Rod: Yes, with neck expander (size button)
- Quantity: 1 die
- Shell Holder: Not included (uses #1)
- Country of Origin: United States
What’s Included
- Redding 30-06 Springfield full length sizing die (91148)
- Decapping rod assembly with neck expander size button
- Lock ring
- Plastic storage case
Frequently Asked Questions
Does the Redding 91148 come as a full die set or just the sizing die?
This is the single full length sizing die only, not a complete set. It handles resizing the case and decapping the spent primer. If you want to seat bullets too, you'll need to add a seating die to your setup.
Will this 30-06 die fit my reloading press?
Yes. It uses the industry standard 7/8-14 threaded body, which fits virtually any single stage or progressive reloading press. Just thread it in, set your lock ring, and you're ready to size.
Do I need a shell holder with this die?
The die does not include a shell holder, so you'll want to pick one up separately if you don't already have it. The 30-06 Springfield uses the #1 shell holder in Redding's system. You'll also want case lube to run brass through a full length die smoothly.
Does the 91148 size the neck too, or just the body?
It sizes the entire case, meaning the body, shoulder, and neck all get worked back down to spec. The built-in decapping rod carries a neck expander button that opens the neck back to the correct inside diameter for proper bullet tension as the case comes out of the die.



Reviews
There are no reviews yet.