0
0

Redding Competition Bushing Neck Die Set 30-06 Springfield 58148

UPC: 611760581489

$307.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Redding's flagship neck-sizing setup for the 30-06 Springfield, built for handloaders who've already put in the work sorting brass and want dies that reward that effort. The set pairs a Competition Bushing Neck Sizing Die with a Body Die and the well-regarded Competition Seating Die, giving you the flexibility to neck size only or bump the shoulder back when cases start chambering tight. Interchangeable neck bushings let you dial in exactly the neck tension you want, and both the sizing die and the seater carry micrometer heads so you can return to a favorite setting any time.

What Sets the Competition Bushing Neck Die Apart

The neck sizer uses a tightly chambered sliding sleeve that fully supports and aligns the case before the bushing ever touches the neck. As the ram comes up, the bushing self-centers on the case neck while the decapping rod stays in alignment much like a firing pin rides in a bolt. The micrometer lets you size only part of the neck length, a favorite benchrest trick for keeping a portion of the neck untouched for better bullet alignment. Because this die skips the expander button, it's meant for brass that's been sorted for neck wall thickness or neck turned for uniformity.

Why Reloaders Reach for the Redding Competition Seater

The Competition Seating Die has earned its reputation as one of the straightest-seating dies around. A precision-ground sliding chamber sleeve captures the case before the bullet starts down, holding case and bullet in alignment through the whole stroke so the die itself doesn't introduce runout. The micrometer head adjusts in .001 inch increments with no clicks, and the zero feature lets you mark your go-to seating depth for a particular rifle or bullet.

Putting the 30-06 Die Set to Work

All three dies use standard 7/8-14 threads and drop into any common single-stage press. Keep in mind the neck bushings and shellholder are not included, so pick your bushing size based on your loaded neck diameter and plan for roughly .002 inch of neck tension as a starting point. For the 30-06 Springfield, that's the #1 shellholder in Redding's lineup.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 58148
  • UPC: 611760581489
  • Caliber: 30-06 Springfield
  • Bullet Diameter: .308
  • Die Set Type: Competition Bushing Neck 3-Die Set
  • Dies Included: Competition Bushing Neck Sizing Die, Body Die, Competition Seating Die
  • Thread Size: 7/8-14
  • Micrometer Adjustment: .001 inch increments, click-free with zero set
  • Shellholder Size: #1 (sold separately)
  • Neck Bushings: Interchangeable, sold separately
  • Expander Button: Not included (carbide size button kits available separately)

What’s Included

  • Competition Bushing Neck Sizing Die with micrometer head
  • Body Die
  • Competition Seating Die with sliding chamber sleeve and micrometer head
  • Die box
  • Instructions

Frequently Asked Questions

Does the Competition Bushing Neck Die Set come with neck bushings?

No, neck bushings are sold separately so you can match the exact neck tension you want. A good starting point is to measure the neck diameter of a loaded round and choose a bushing about .002 inch smaller. This lets you fine-tune tension for your specific brass and bullet combination.

Is a shellholder included with this 30-06 die set?

The shellholder is not included with the set. For the 30-06 Springfield you'll want Redding's #1 shellholder, which also fits other cartridges that share the same case head. Pick one up alongside the dies if you don't already have it.

Do I need neck-turned brass to use this set?

This set is recommended for brass sorted for neck wall thickness uniformity or neck turned, since the neck sizing die skips the expander button. Running uniform brass is what lets the bushing deliver its most consistent neck tension. If you prefer working with factory brass as-is, a Type S die with an expander button is the more forgiving route.

What makes the Redding Competition Seating Die different from a standard seater?

The competition seater uses a precision-ground sliding chamber sleeve that captures and supports the case before the bullet starts seating, keeping everything in alignment to minimize runout. It also has a micrometer head calibrated in .001 inch increments with a zero feature for returning to a favorite seating depth. Many precision handloaders consider it one of the straightest-seating dies available.

Additional information

UPC

611760581489

Manufacturer

Manufacturer Part Number

58148

Reviews

There are no reviews yet.

Be the first to review “Redding Competition Bushing Neck Die Set 30-06 Springfield 58148”