0
0

Redding 30-06 Springfield Competition Bullet Seating Die – 55148

UPC: 611760551482

$143.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Competition Seating Die, part number 55148, is built for the handloader who cares about runout, concentricity, and getting the same seating depth round after round. This is the top of Redding's seating lineup for the .30-06 Springfield, and the design has earned a reputation as the state of the art in straight line bullet seaters. Instead of dropping a bullet loosely into the top of the die, this one fully supports and aligns both the case and the bullet inside a close-fitting, precision ground sleeve before seating even begins. That alignment is where the magic happens.

What Sets the Redding Competition Seating Die Apart

The heart of this die is the floating seating stem system. The fit between the bullet guide and the seating stem is so tight that the stem can be shown to float on a column of air, and the stem itself is precision ground to match the .308 bullet diameter. The result is minimal bullet runout and the kind of concentricity that bench rest and long-range folks chase. Pair it with a quality neck or bushing sizing die and you can tune your ammo to very tight tolerances.

Dialing In the 30-06 Competition Seater

The micrometer top is calibrated in .001" increments and is infinitely adjustable without clicks, so you are not locked into preset detents. One full revolution of the micrometer barrel moves seating depth .050". There is also a zero set feature that lets you index the micrometer to your rifle or your favorite load, which makes returning to a proven seating depth quick and repeatable. Set it, record it, and you can come back to it any time.

A couple of things worth knowing: this die does not crimp, so if your loads call for a roll or taper crimp you will want a separate crimp die. The shellholder is also sold separately, and the .30-06 uses Redding's #1 standard shellholder. Redding also notes this die is not intended for compressed loads, so keep that in mind during load development. It is made in the USA to the tolerances Redding is known for.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 55148
  • UPC: 611760551482
  • Caliber: .30-06 Springfield
  • Die Type: Competition Bullet Seating Die
  • Bullet Diameter: 0.308"
  • Thread Size: 7/8"-14
  • Micrometer Adjustment: .001" increments, .050" per revolution
  • Seating Stem: Free-floating, precision ground
  • Standard Shellholder: #1 (sold separately)
  • Crimp Capability: None (separate crimp die required)
  • Country of Origin: United States

What’s Included

  • Redding 30-06 Springfield Competition Bullet Seating Die with micrometer top

Frequently Asked Questions

Does the Redding Competition Seating Die crimp the case?

No, this die seats bullets only and does not apply a crimp. Crimping on the Competition line is handled as a separate operation, so if your load needs a roll or taper crimp you will want to add a dedicated crimp die. Many precision reloaders skip crimping entirely and rely on neck tension instead.

Do I need a shellholder with the 55148 seating die?

Yes, the shellholder is sold separately. The .30-06 Springfield uses Redding's #1 standard shellholder, which also fits several other common cartridges in that case family. Any quality 7/8"-14 press and standard shellholder will work fine with this die.

How does the micrometer top help with seating depth?

The micrometer is calibrated in .001" increments and adjusts infinitely without clicks, with one full turn moving seating depth .050". It also has a zero set feature so you can index it to a favorite load and return to that exact depth later. That makes load development and repeat batches far more consistent.

Can I use this die for compressed loads?

Redding specifically notes this die is not intended for compressed loads. For the vast majority of standard .30-06 loads it works beautifully, but if you are running heavily compressed powder charges you should keep that in mind during setup and avoid bottoming out the stem.

Additional information

UPC

611760551482

Manufacturer

Manufacturer Part Number

55148

Reviews

There are no reviews yet.

Be the first to review “Redding 30-06 Springfield Competition Bullet Seating Die – 55148”