Description
The DNZ Freedom Reaper 3.8 Forward FR Picatinny Rail is a one-piece scope mount built for folks running 1-inch optics who want to push their range and keep things dead simple. It clamps straight onto a standard 1913 Picatinny rail, so there's no need to match a base to a specific receiver. The 3.8-inch forward position shifts your optic out ahead of the receiver, which makes dialing in eye relief a lot easier, especially on tactical-style rifles and AR platforms where getting the scope far enough forward can be a headache.
What really sets this one apart is the integrated 20 MOA cant. That built-in taper gives your scope a head start on elevation, freeing up more of your turret's internal adjustment for long-range work so you don't run out of dial when the target's way out there. The whole thing is precision machined in North Carolina from a solid block of 6061-T6 aluminum, which keeps it light while still soaking up recoil and shock better than you'd expect from something this size. Because it's one piece with no moving parts between your rifle and scope, you don't have to mess with lapping rings or worry about misalignment down the road.
Why the Forward Freedom Reaper Earns Its Keep
The one-piece design means the rings and base are machined as a single unit, so ring alignment is baked in from the factory. DNZ uses up to four times the thread engagement of comparable mounts along with socket-head cap screws, which translates to a rock-solid hold that stays put under heavy recoil. The matte black anodized finish shrugs off scratches and holds up to rough handling and temperature swings.
Fit and Setup on the 3.8 Forward Picatinny Mount
This model is built for 1-inch scope tubes and sits at the extra-high 1.38-inch mount height, giving you plenty of clearance for larger objective bells. It works on right or left-hand firearms and installs with the included hardware. Keep in mind the 20 MOA taper runs the front ring slightly lower than the rear, which is exactly what you want for stretching your effective range.
Key Specifications
- Manufacturer: DNZ
- Model: Freedom Reaper 3.8 Forward Picatinny Rail-20MOA
- Manufacturer Part Number: 121FPT2
- UPC: 879956006196
- Scope Tube Diameter: 1 inch
- Cant: 20 MOA
- Forward Offset: 3.8 inch
- Mount Type: 1913 Picatinny Rail
- Ring Height: Extra High (1.38 in mount height)
- Pieces: 1
- Material: 6061-T6 Billet Aluminum
- Finish: Matte Black Anodized
- Country of Origin: USA
- Shipping Weight: 0.545 lb
What’s Included
- DNZ Freedom Reaper 3.8 Forward one-piece scope mount with integral 1-inch rings
- Mounting hardware
Frequently Asked Questions
What size scope does the DNZ Freedom Reaper 3.8 Forward mount fit?
This model is built specifically for 1-inch scope tubes. The rings are machined as part of the one-piece base, so you'll want a scope with a 1-inch main tube to match it correctly.
What does the 20 MOA cant on this Freedom Reaper mount do?
The 20 MOA cant is a built-in forward taper that angles your scope slightly downward at the front. This gives your optic a head start on elevation, leaving more of your turret's internal adjustment available for long-range shots so you don't max out your dial at distance.
Does the DNZ Freedom Reaper 3.8 Forward rail work on an AR-15 or other Picatinny-equipped rifle?
Yes. It clamps directly to any standard 1913 Picatinny rail, which makes it a good match for AR platforms and other flat-top or rail-equipped rifles. The 3.8-inch forward offset is especially handy for getting the scope far enough ahead for proper eye relief.
Do I need to lap the rings on this mount?
No lapping is needed. Because the Freedom Reaper is machined from a single block of aluminum with the rings and base as one unit, alignment is set at the factory, so you can mount your scope and go.



Reviews
There are no reviews yet.