Description
When you're drilling and tapping a receiver for small 3-56 screws, there's zero room for a wandering bit or a cocked tap. The Forster 3-56 Bushing Set gives you the two guide bushings you need to run that thread size through the Universal Sight Mounting Fixture. These are hardened steel, precision ground, and marked so there's no guessing which one goes where.
What Comes in the 3-56 Bushing Set
This set includes two bushings, one marked #45 for the drill and one marked #36 for the tap. You drop the drill bushing into the fixture's over-arm to guide the bit, then swap it for the correctly sized tap bushing before you cut threads. That swap is the whole trick behind why these fixtures work so well. The drill runs true through a hardened, ground bushing so runout is eliminated, and tapping through the matching slip bushing keeps the tap from cocking, which is the number one cause of broken taps and sloppy holes.
Where the 3-56 Bushings Fit In
The 3-56 size is the smallest of Forster's bushing options, ahead of the 6-48, 8-40, and 10-32 sets. It's the size you reach for on delicate work and older or lighter receivers where a bigger screw isn't in the cards. Keep in mind this is a component set for the Universal Sight Mounting Fixture, which ships from Forster with 6-48 bushings by default. You'll need that base fixture to put these to work.
Built by a Name That's Been at It a While
Forster has been turning out precision reloading and gunsmithing gear since 1935, and this bushing set carries the same fit-and-finish reputation. Buy the size once and it lasts, since hardened tool steel shrugs off repeated drilling and tapping cycles. If you already run the Forster fixture and need to step down to 3-56 threads, this is the set that gets you there without a workaround.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: UF1000-UB0356
- UPC: 757253006906
- Thread Size: 3-56
- Bushings Included: 2
- Drill Bushing Marking: #45
- Tap Bushing Marking: #36
- Material: Hardened tool steel, precision ground
- Fits: Forster Universal Sight Mounting Fixture (UF1000)
- Type: Drill and tap guide bushing set
What’s Included
- 1 drill guide bushing, marked #45
- 1 tap guide bushing, marked #36
Frequently Asked Questions
What drill and tap sizes come in the 3-56 bushing set?
The set has two bushings, one marked #45 for drilling and one marked #36 for tapping. You use the drill bushing first to guide the bit, then swap in the tap bushing to cut the 3-56 threads. Both are labeled so there's no mix-up at the bench.
Do I need the Forster fixture to use these bushings?
Yes. The 3-56 bushing set is a component made for the Forster Universal Sight Mounting Fixture, not a standalone tool. The fixture holds your barrel in its V-blocks and the bushings drop into the over-arm to guide your bit and tap on center.
Doesn't the Universal Sight Mounting Fixture already come with bushings?
It does, but only 6-48 bushings unless you order otherwise. If you need to drill and tap for smaller 3-56 screws, this is the add-on set that gets you there. Forster also offers 8-40 and 10-32 sets for larger thread sizes.
Why does swapping to a separate tap bushing matter?
Using a tap bushing sized correctly for the tap keeps it from cocking as it enters the hole. Cocking is a leading cause of broken taps and out-of-round threads, so the matched slip bushing helps you cut clean, straight threads every time.





Reviews
There are no reviews yet.