0
0

Hornady Match Grade Bushing .292 Diameter | 6.5mm Neck Sizing 594292

UPC: 090255592924

$23.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady .292 Match Grade Bushing is a small piece of steel that makes a real difference on your target. It installs into Hornady Match Grade neck sizing and full-length sizing dies, and the inside diameter is what sets your final neck size. Because it floats and self-centers inside the die body, you get even, concentric neck tension without the risk of over-working your brass. Less sizing means longer case life and more consistent seating, which usually shows up as tighter groups downrange.

Where the .292 Match Grade Bushing Fits

This particular size is a 6.5mm bushing, and it's one of the sizes Hornady lists for the 6.5 Creedmoor family. The simplest way to pick the right one is to measure the neck diameter of a loaded or dummy round that chambers cleanly in your rifle, then subtract about .001" from that number. Grab the bushing that matches or sits just under that dimension and you'll land in a sensible starting zone for neck tension. If you're reloading 6.5mm and the .292 lines up with your measurements, this is your bushing.

Why Reloaders Reach for the Hornady Bushing System

The whole point of a bushing die setup is control. Standard dies size the neck down to SAAMI minimum and then an expander pulls it back up, which works plenty of brass every cycle. With an interchangeable bushing you size only as much as you actually need, so the brass stays happier and your runout stays low. The bushing works in both Hornady's neck sizing and full-length Match Grade dies, so you can swap approaches without buying a whole new setup.

Built from polished steel and made in the USA, this bushing is sold as a single piece and is meant to pair with Hornady Match Grade bushing dies, which are sold separately. If you already run those dies, adding the correct bushing sizes is how you fine-tune the load to your chamber and your brass.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 594292
  • UPC: 090255592924
  • Inside Diameter: .292 in
  • Caliber: 6.5mm
  • Finish: Polished Steel
  • Type: Self-Centering Neck Size Bushing
  • Compatibility: Hornady Match Grade Neck & Full-Length Sizing Dies
  • Quantity: 1
  • Origin: Made in USA

What’s Included

  • One (1) Hornady .292 Match Grade Bushing

Frequently Asked Questions

What cartridges does the .292 Match Grade Bushing work with?

This is a 6.5mm bushing and it's one of the sizes Hornady lists for the 6.5 Creedmoor family. The right size for your rifle depends on your brass and chamber, so it's worth measuring before you commit. If you load 6.5mm and your numbers point to .292, you're in the right place.

Does this bushing come with a Hornady die?

No. The bushing is sold as a single piece and is designed to drop into Hornady Match Grade bushing dies, which are purchased separately. You'll need one of those dies for the bushing to do its job.

How do I know which bushing diameter to choose?

Measure the neck diameter of a loaded or dummy round that chambers well in your rifle, then subtract about .001 inch from that figure. Pick the bushing that matches or sits just under that number for a solid starting point. From there you can fine-tune neck tension to your liking.

Will this bushing work in both neck and full-length Hornady dies?

Yes. The .292 bushing fits both the neck sizing and full-length Match Grade dies from Hornady. It self-centers inside the die body so you get consistent, concentric neck sizing either way.

Additional information

UPC

090255592924

Manufacturer

Manufacturer Part Number

594292

Shipping Weight

0.025

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade Bushing .292 Diameter | 6.5mm Neck Sizing 594292”