Description
Headspace is one of those things you can't eyeball, and getting it right matters for both accuracy and safety. The Forster 284 Winchester No-Go Gauge gives you a fast, repeatable way to check where your chamber sits. The No-Go length corresponds to the maximum headspace Forster recommends for gunsmiths chambering a new rifle. If your bolt closes on it, that doesn't automatically mean the chamber is scrap, it just means headspace is longer than the gauge allows, at which point a Field gauge tells the rest of the story.
What the 284 Winchester No-Go Gauge Actually Checks
Forster builds three gauge lengths per caliber: Go, No-Go, and Field, running shortest to longest. The Go confirms your chamber will accept SAAMI-spec ammo, while this No-Go is the tighter check gunsmiths lean on when finishing a freshly reamed barrel. Forster's No-Go gauges are cut to allow only about .004" of headspace, which is noticeably tighter than the SAAMI maximum. That's exactly why custom barrel shops reach for them when they want a snug, accurate chamber instead of just a safe one.
One Gauge for the Whole 284 Family
One of the best things about this gauge is how much ground it covers. Because all these cartridges share the same case head and shoulder, the 284 Winchester No-Go works across the parent round and its wildcat offspring. That includes the 22-284, 6mm-284, 25-284, 6.5-284 Norma, 270-284, 30-284, and 35-284. If you're building on the popular 6.5-284 for long-range work, this is the gauge you want on the bench.
Built to Measure, Not Guess
This gauge is machined from hardened steel and ground to tight tolerances, which is why it's treated as a real measurement instrument rather than a rough reference. It measures 1.815" in length and is ready to drop straight into your chamber for a bolt-close check. For handloaders running warm 284-based loads, periodically confirming headspace is a smart habit, since chamber dimensions can creep over time.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG0284N
- UPC: 757253004490
- Cartridge: 284 Winchester
- Gauge Style: No-Go
- Material: Hardened Steel
- Color: Steel
- Length: 1.815"
- Quantity: 1
- Country of Origin: United States
What’s Included
- Forster 284 Winchester No-Go headspace gauge (1)
Frequently Asked Questions
Which cartridges does the Forster 284 Winchester No-Go gauge cover?
Because they all share the same case head and shoulder dimensions, this single gauge handles the 284 Winchester plus its wildcat family. That includes 22-284, 6mm-284, 25-284, 6.5-284 Norma, 270-284, 30-284, and 35-284. One gauge covers the whole group, which is handy if you build on the 284 case.
What does it mean if my bolt closes on the No-Go gauge?
The No-Go marks the maximum headspace Forster recommends for a freshly chambered rifle, not the absolute SAAMI maximum. If your bolt closes on it, the chamber may still be within SAAMI spec or it may have excessive headspace. To know for sure, follow up by checking the chamber with a Field gauge.
How tight is the Forster No-Go tolerance?
Forster's No-Go gauges are cut to allow only about .004" of headspace, which is tighter than the SAAMI maximum allowance. That's why custom barrel shops favor them for finishing a chamber snug and accurate. Each gauge is machined and ground to tight tolerances so your readings stay repeatable.
Do I need the Go gauge too, or is the No-Go enough?
The No-Go checks that your chamber isn't past the recommended maximum, while the Go confirms it will accept SAAMI-spec ammunition at the minimum dimension. For chambering a new barrel, gunsmiths typically use both to bracket the chamber between the two. If you're only spot-checking an existing rifle, the No-Go on its own is a useful reference.




Reviews
There are no reviews yet.