$79.20
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson 284 Winchester bullet seating die is a chamber type seater, which is a different animal from the usual threaded dies you screw into a press. Instead of relying on press alignment, this die completely captures both the case and the bullet before the bullet is pushed straight into the case mouth by a close-fitting seating stem. That hands-off approach to alignment is exactly why precision reloaders and benchrest crowds reach for Wilson seaters when they want minimal runout and seating depth they can repeat round after round.
This is a hand die, meaning it runs on an arbor press or with a light tap from a mallet rather than a conventional reloading press. You drop your sized and primed case into the die, set the bullet, and seat it with a short, controlled stroke. Because the case body and bullet are held in line by the die itself, you take press flex and sloppy threads out of the equation. The result is the kind of concentricity that shows up on target, especially with a cartridge like the 284 Win that already has a reputation for accuracy out of a short action.
Wilson has been turning out reloading tools in the USA for decades, and this seater reflects that. The body is turned from machined steel rather than cast, and each seater is hand reamed to the correct headspace so your brass sits exactly where it should. The tight tolerances are what let you chase single-digit seating variation and fine-tune jump to the lands once you have a load dialed in.
One of the nicer perks of a Wilson chamber seater is portability. Pair it with a small arbor press and you can seat bullets right at the bench or at the range, tweaking depth between strings without hauling your whole setup around. For anyone loading the 284 Winchester seriously, this die is a proven, no-nonsense piece of the precision puzzle.
No, this is a chamber type hand die designed to run on an arbor press or with a light mallet tap. It is not threaded for a conventional 7/8-14 press. The die captures the case and bullet itself, which is how it delivers such consistent alignment.
No, the BS28-WIN is the standard polished steel seater and comes with the standard seating stem, not a micrometer adjustment. Wilson does offer a replacement micrometer cap separately if you want finer depth adjustments down the road. The standard cap still lets you set and repeat seating depth reliably.
The die ships with the standard seating stem, which works well for most conventional bullet profiles. If you are loading VLD or heavy long-range bullets with sharp secant ogives, a VLD seating stem is available separately and is worth adding for the best contact on those projectiles. Swapping stems is quick and easy.
A chamber type seater completely captures the case and bullet before seating, holding both in line without depending on press threads or ram alignment. That generally produces lower runout and more repeatable seating depth than a conventional die. It is a big reason benchrest and precision reloaders favor Wilson seaters.
| UPC | 815145021380 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BS28-WIN |
You must be logged in to post a review.
Reviews
There are no reviews yet.