Description
The Forster 284 Shehane Full Length Sizing Die is built for handloaders who want their fired brass brought back to spec without any guesswork. Like the rest of Forster's Bench Rest line, it works your case neck, shoulder, and body all in one stroke, deprimes the spent primer, and expands the neck on the way back out. The result is ammo that drops into your chamber like it was made for it, which is exactly the point if you are chasing repeatable accuracy out of a 284 Shehane.
What Sets the 284 Shehane Full Length Die Apart
The standout feature here is Forster's E-Z Out expander ball. It sits higher up in the neck area than you find on most dies, so the case stays supported and the neck axis stays aligned with the case axis as the brass is drawn back out. That alignment is what cuts down on runout and gives you straighter necks shot after shot. Each die is machined from quality steel to tight tolerances and hand polished before and after heat treating, so the inside surface is slick and consistent.
Fitting the 284 Shehane Sizing Die to Your Press
This die uses standard 7/8-14 threads and adapts to just about any single stage press on the market. It also comes with Forster's Cross Bolt Lock Ring, which clamps the two halves of a split ring together instead of digging a set screw straight into the die body threads. That means your settings stay put and you are not chewing up the die when you snug things down. If you are running a Forster Co-Ax press, you can skip the shellholder entirely. In any other press, just use the shellholder your press maker recommends for the 284 family of cases.
For anyone loading the wildcat 284 Shehane, a dedicated full length die like this is the backbone of a consistent load. Pair it with a Forster seater down the road and you have a setup that turns out concentric, chamber-perfect rounds every time you sit down at the bench.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 005535
- UPC: 757253990007
- Cartridge: 284 Shehane
- Die Type: Full Length Sizing Die
- Product Line: Bench Rest
- Material: Steel, hand polished
- Thread: 7/8-14
- Expander: E-Z Out Expander Ball
- Lock Ring: Cross Bolt Lock Ring included
- Functions: Sizes neck, shoulder, and body; deprimes; expands neck
What’s Included
- Forster 284 Shehane Full Length Sizing Die
- Cross Bolt Lock Ring
- E-Z Out Expander Ball assembly
Frequently Asked Questions
What does the Forster 284 Shehane Full Length Sizing Die do in one stroke?
It sizes the case neck, shoulder, and body in a single pass, deprimes the spent primer, and expands the case neck on the way back out. That brings fired brass back to a glove fit with your chamber. Use it after each firing, or after a few firings once brass flow calls for full length sizing.
Will this die work in my press?
Yes. It uses standard 7/8-14 threads and adapts to just about any single stage press out there. If you run a Forster Co-Ax press you do not need a shellholder, and in any other press you just use the shellholder your press maker recommends for the 284 case family.
What is the E-Z Out expander ball and why does it matter?
It is Forster's expander button positioned higher in the neck area than most competing dies. That elevated position keeps the case neck supported and holds the neck and case axis in alignment as the brass is pulled out of the die. The payoff is less runout and straighter necks for more consistent loads.
Is this die sold as part of a set?
This listing is the standalone Full Length Sizing Die for the 284 Shehane. Forster does offer a Bench Rest Die Set that pairs this sizer with a Bench Rest Seater Die, but if you already have your seating covered, the individual sizer is all you need.





Reviews
There are no reviews yet.