$116.16
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Anybody who takes .280 Remington handloading seriously knows that neck tension is where a lot of accuracy lives, and this L.E. Wilson full length sizing die hands you control over it. Instead of relying on an expander ball dragging through the neck, this die uses interchangeable bushings that let you set the exact amount of grip you want on your bullet. You size the case body, bump the shoulder for proper headspace, and set your neck tension all in one pull of the handle.
The design mimics the neck sizing of Wilson's dedicated neck dies, leaving roughly 3/16" at the base of the neck unsized. A lot of reloaders swear by this approach for better concentricity and tighter groups. Because you're not stretching brass back and forth over an expander, your cases see less stress and you get more firings out of each one before the necks give up.
Build quality is classic Wilson. The die is machined to tight tolerances from specially hardened steel, harder than a Grade 8 bolt, with stainless parts that hold up to years of use. It threads into any standard 7/8"-14 press, so there's no special setup or oddball equipment needed. An adjustable depth decapping rod handles primer removal, and Wilson throws in a spare decapping punch so you're covered if you ever tweak one.
One thing to know going in: the bushings are sold separately. That's by design. It lets you pick the exact bushing diameter for your brass thickness and the neck tension your load wants, and swapping to a different bullet or working up a fresh load is as easy as dropping in a different bushing. Pair it with a Wilson case gauge for your .280 Rem and you can set shoulder bump precisely so you're not overworking brass. For folks chasing consistency and long case life out of their .280 Remington, this is the kind of die that earns its spot on the bench.
No, the bushings are sold separately. This is intentional so you can choose the exact bushing diameter that matches your brass thickness and the neck tension your load calls for. Swapping bushings also makes it easy to tune for different bullets without buying a new die.
Yes, it uses standard 7/8"-14 threads, so it works in most common single-stage and turret presses. There's no special equipment required to run it. Just thread it in, set your shoulder bump, and you're ready to size.
A bushing die controls neck tension by sizing the outside of the neck instead of dragging an expander ball through the inside. That means less working of the brass, more consistent neck tension, and longer case life. Many reloaders also find it improves concentricity and accuracy.
Yes, because it performs full length sizing it resizes the entire case body and bumps the shoulder for proper headspace. That makes it suitable for semi-autos as well as bolt guns. Pairing it with a Wilson case gauge helps you set shoulder bump precisely for reliable chambering.
| UPC | 815145026453 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | FLD-280R |
You must be logged in to post a review.
Reviews
There are no reviews yet.