Description
Anyone who has spent time cleaning a 28 gauge knows the frustration of running patch after patch and still seeing gunk. The TCS 28 GA. Cleaning Jag takes a different approach. Instead of relying on a tight jag fit alone, it uses rubber O-rings to press the patch firmly and evenly against the bore all the way down the barrel. That even contact is what pulls out powder residue, plastic wad fouling, and lead buildup with fewer passes than a standard jag.
What Sets the TCS 28 Gauge Jag Apart
The body is machined from solid aluminum and finished with a green anodized coating, which is TCS's color code for the 28 gauge size so you can grab the right one out of your kit at a glance. Aluminum keeps it light and easy to work down the barrel, and it shrugs off the solvents you'll be running through it without corroding. The O-rings do the real work here, holding the patch tight against the bore so you get consistent scrubbing pressure instead of a patch that loosens and slips halfway through.
Fitting the 28 GA. Cleaning Jag to Your Setup
This jag is threaded 5/16"-27 male, which is the standard for shotgun cleaning rods, so it should thread right onto whatever rod or handle you're already running. For best results, stick with round patches that are .015" thick, since that's what the O-ring design is built around. If you're facing heavier buildup, you can spread fine steel wool or bronze wool over the patch to break up stubborn fouling.
More Than Just Bore Cleaning
Beyond scrubbing, this jag pulls double duty. Run an oiled patch through before long-term storage to protect the bore, then run a dry one to strip that oil back out before you head to the field. It's a small tool that earns its spot in the cleaning kit, and it's made in the USA.
Key Specifications
- Manufacturer: TCS
- Manufacturer Part Number: J28
- UPC: 689466088052
- Caliber/Gauge: 28 Gauge
- Material: Solid Aluminum
- Finish: Green Anodized (28 Gauge color code)
- Thread: 5/16"-27 tpi male
- Patch Requirement: Round patches, .015" thick
- Design: Rubber O-ring patch retention
- Country of Origin: Made in USA
What’s Included
- TCS 28 GA. Cleaning Jag
- 3 rubber O-rings
Frequently Asked Questions
What size rod does the 28 GA. cleaning jag fit?
It's threaded 5/16"-27 male, which is the standard thread for shotgun cleaning rods. That means it should thread onto most standard shotgun rods and handles without needing an adapter. If your rod uses that common shotgun thread, you're good to go.
What kind of patches should I use with this TCS jag?
TCS recommends round patches that are .015" thick, since the O-ring design is built around that size. Square patches can cause fit problems, so stick with round ones for the best contact and cleaning action. For heavier fouling, you can also lay fine steel wool or bronze wool over the patch.
How is the O-ring design better than a regular jag?
The rubber O-rings press the patch firmly and evenly against the bore surface all the way down the barrel. A standard jag relies on a tight fit alone, which can let the patch loosen partway through. The even pressure from the O-rings means more thorough scrubbing and usually fewer patches to get the bore clean.
Can the 28 gauge jag be used for oiling the bore too?
Yes. Beyond scrubbing out fouling, you can run an oiled patch through to protect the bore for storage. When you're ready to shoot, run a dry patch back through to strip that oil out before firing.





Reviews
There are no reviews yet.