Description
The Redding Type S-Match Bushing Full Length Die Set is built for the 270 WSM handloader who wants real control over every part of the case. This is a two-die set that pairs a Type S Bushing Full-Length Sizing Die with a Competition Seating Die, giving you the tools to size brass your way and seat bullets with match-grade consistency. It's the kind of setup that rewards you with tighter groups and longer-lasting brass once you've got your process dialed.
What the 270 WSM Type S Bushing Sizing Die Does
The bushing full-length die sizes the entire case body, lets you set your shoulder bump, and uses interchangeable bushings to control exactly how much the neck gets worked. Bushings come in .001 inch increments, so you can tune neck tension to your brass and bullet combination instead of settling for a one-size-fits-all approach. Working the neck less means your brass lasts longer and your runout stays low. The die ships with a decapping rod, a standard sizing button, and a decapping pin retainer that drops in place of the button when you're running neck-turned or sorted brass.
Why the Competition Seater Rounds Out This 270 WSM Die Set
The Competition Seating Die is where the fine-tuning happens. A micrometer head adjustable in .001 inch clicks makes dialing in seating depth quick and repeatable, and a sliding sleeve captures and centers the case before the stem ever touches the bullet. That design is what gives you straight, concentric ammo round after round, which matters a lot when you're chasing accuracy out of a short magnum like the 270 WSM.
Keep in mind the bushings and shellholder are sold separately, so you'll want to pick those up to match your brass. Redding dies are made in the USA and machined to tight tolerances, and this set is a favorite among precision reloaders and hunters who load their own 270 WSM for long range work.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 36255
- Model: Type S-Match Bushing Full Die Set
- Caliber: 270 Winchester Short Magnum (270 WSM)
- Die Set Type: Two-Die Bushing Full Length Set
- Sizing Die: Type S Bushing Full-Length Sizing Die
- Seating Die: Competition Micrometer Seating Die with Sliding Sleeve
- Bushing Adjustment: Interchangeable bushings in .001 inch increments
- Seating Adjustment: Micrometer, .001 inch increments
- Thread: 7/8-14
- Material: Heat-Treated Steel
- Country of Origin: USA
- UPC: 611760362552
What’s Included
- One Redding Type S Bushing Full-Length Sizing Die with decapping rod, standard sizing button, and decapping pin retainer
- One Redding Competition Bullet Seating Die with sliding sleeve and micrometer adjusting head
- One die box
- Complete instructions
Frequently Asked Questions
Do the bushings come with the 270 WSM Type S-Match die set?
No, the neck bushings are sold separately so you can match them to your exact brass and bullet combination. Bushings are available in .001 inch increments, which lets you fine-tune neck tension. The shellholder is also sold separately.
How many dies are in this Redding 270 WSM bushing set?
This is a two-die set. You get the Type S Bushing Full-Length Sizing Die and the Competition Micrometer Seating Die with a sliding sleeve. Together they handle full-length sizing with adjustable neck tension and precise, concentric bullet seating.
What size bushing should I start with for 270 WSM?
A good starting point is to measure the outside diameter of a loaded case neck and choose a bushing about .002 inch smaller for brass that hasn't been neck-turned. If you're running neck-turned brass, you can go a touch smaller. It's worth confirming with a few test rounds to get the neck tension you like.
Will this die set fit a standard single-stage press?
Yes. These dies use the standard 7/8-14 thread, so they'll thread right into any common single-stage or turret press. You'll just need the correct shellholder for 270 WSM, which is sold separately.



Reviews
There are no reviews yet.