Description
The Redding Competition Seating Die in 270 Winchester (part #55135) is built for handloaders who chase tight groups and want their seating depth nailed down to the thousandth. This is the bottleneck version from Redding's Competition line, and it uses a spring-loaded sliding sleeve that fully supports both the case and the bullet before seating ever begins. That alignment is where the magic happens, keeping runout down and giving you the kind of concentric ammo that standard seaters struggle to match.
What Sets the 270 Winchester Competition Seater Apart
The heart of this die is the micrometer-adjustable seating head, calibrated in .001" increments and infinitely adjustable with no clicks to count. There's a zero-set feature so you can lock in your favorite seating depth and come right back to it, which is a real time saver if you swap between hunting and target bullets or load for more than one 270 rifle. The seating stem is precision ground to match the .277" bullet diameter, and it rides so cleanly inside the guide that Redding likes to say it floats on a column of air.
Getting the Most Out of This Redding Seating Die
Reloaders who care about accuracy tend to put this die near the top of the list, and it's one of the most popular straight-line seaters on the bench for good reason. It pairs best with quality brass and consistent bullets so the precision of the tool has something to work with. One thing worth knowing up front: this is a dedicated seating die and does not crimp, so if you want a crimp you'll run a separate crimp die. Redding also notes it isn't meant for heavily compressed powder charges.
The die uses the standard 7/8"-14 threading, so it drops right into any common single stage or turret press. If you reload 270 Winchester and want the seating side of your process dialed in and repeatable load after load, this is the tool that gets you there.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 55135
- UPC: 611760551352
- Caliber: 270 Winchester
- Die Type: Competition Bullet Seating Die (Bottleneck)
- Bullet Diameter: 0.277"
- Adjustment: Micrometer, .001" increments, no clicks
- Seating Stem: Precision ground to match bullet diameter (STD profile)
- Thread Size: 7/8"-14
- Crimp: Does not crimp
What’s Included
- Redding Competition Seating Die for 270 Winchester
- Micrometer seating head with zero-set feature
- Precision ground seating stem
- Instructions
Frequently Asked Questions
Does the Redding Competition Seating Die for 270 Winchester crimp the bullet?
No, this is a dedicated seating die and does not apply a crimp. If you want to crimp your 270 Winchester loads, you'll need to run a separate crimp die after seating. Most precision reloaders running this die skip crimping altogether and rely on proper neck tension instead.
How does the micrometer adjustment work on this die?
The micrometer head is calibrated in .001" increments and adjusts smoothly with no clicks, so you can fine tune seating depth very precisely. It also has a zero-set feature that lets you lock in a favorite depth and return to it anytime. That makes it easy to switch between different bullets or rifles without guessing at your settings.
Will this die work with any standard press?
Yes. It uses the common 7/8"-14 thread, so it fits standard single stage and turret presses without any trouble. You'll want a #1 shellholder for the 270 Winchester case.
Can I use this seating die with compressed powder charges?
Redding advises against using the Competition Seating Die with heavily compressed loads, since the sliding sleeve design isn't built for that kind of pressure. For standard and non-compressed charges it performs beautifully. If you regularly run compressed loads, a standard seater is the better call for those rounds.




Reviews
There are no reviews yet.