Description
Redding's Type S Bushing Full Length Die is built for the 260 Remington reloader who wants precision without juggling extra steps. It full-length sizes the case body and sets the shoulder while the interchangeable bushing handles neck tension, all in one pass of the press. That combination is why so many 260 shooters running bolt guns and gas guns reach for this die when they're chasing tight groups.
The real draw here is control. Instead of a fixed sizing diameter, you drop in a bushing sized to match your brass and the neck tension you're after. Turn your necks for uniformity? The included decapping pin retainer lets you size without the expander button, so your turned necks stay true. Prefer the standard setup? The size button comes along too, giving you flexibility right out of the box.
Dialing In Your 260 Remington Loads
The adjustable decapping rod lets you reposition the bushing, so you can partial-neck size and leave a portion of the neck untouched. That's handy for brass dedicated to a single rifle, where you want just enough sizing to feed reliably without overworking the metal. Shooters who care about case life and consistent seating depth tend to appreciate how much tuning this one die allows.
What Makes the Type S Bushing Die Flexible
Strip out the bushing and internal parts and the Type S full length die doubles as a body die, bumping the shoulder without touching the neck. It's a nice bonus for a precision setup. Keep in mind the bushings and shellholder are sold separately, so you'll want to pick up the right bushing for your brass. For the 260 Remington, Redding uses the number 1 shellholder, and the die accepts bushings in the common range for the 0.264 bullet diameter. Made in the USA and machined to Redding's reputation for tight tolerances, this is a serious tool for anyone loading accurate 260 ammo.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 77531
- UPC: 611760775314
- Cartridge: .260 Remington
- Die Type: Type S Bushing Full Length Sizing Die
- Bullet Diameter: 0.264"
- Thread: 7/8"-14
- Shellholder: #1 (sold separately)
- Bushings: Interchangeable (sold separately)
- Country of Origin: United States
What’s Included
- Type S Bushing Full Length Sizing Die
- Standard size button
- Decapping pin retainer
Frequently Asked Questions
Do bushings come with the Redding Type S die for the 260 Remington?
No, the bushings are sold separately so you can choose the exact size for your brass and desired neck tension. Measure a loaded round's neck and subtract a thousandth or two to pick your starting bushing. Redding offers both steel and titanium nitride bushings for this die.
Can this die be used as a body die?
Yes. By removing the bushing and internal parts, the Type S Full Length die works as a body die, bumping the shoulder and sizing the case body without touching the neck. That makes it a versatile piece for a precision reloading bench.
What shellholder do I need for the 260 Remington?
The 260 Remington uses Redding's number 1 shellholder, which is sold separately. If you already load other cartridges in the same case family, you may have one on hand. Pick one up along with your bushings to get rolling.
Does this die support neck turning setups?
It does. The die comes with a decapping pin retainer that lets you size without the expander button, which is ideal if you turn your case necks for uniformity. You can also adjust the decapping rod to partial-neck size when you want to leave part of the neck unsized.




Reviews
There are no reviews yet.