0
0

Redding Type S-Match Bushing Full Die Set 260 Remington 36531

UPC: 611760365317

$207.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload 260 Remington for precision work, this Redding Type S-Match Bushing Full Die Set is the kind of tooling that pays you back at the target. It pairs two of Redding's best dies in one box: the Type S Bushing Full Length Sizing Die and the micrometer-adjustable Competition Seating Die. The idea is simple but effective. You fully resize the case body and bump the shoulder back in one pass, while interchangeable bushings let you dial in exactly how much neck tension you want.

What the Type S Bushing Sizer Brings to Your 260 Rem

The sizing die uses interchangeable bushings in .001 inch increments, so you can set neck tension to match your brass, your bullet, and your load instead of settling for whatever a one-size die gives you. Because the bushing is free to self-center on the case neck, concentricity stays tight and runout stays low. The adjustable decapping rod lets you position the bushing to size only part of the neck when you want to leave a section unsized. Pull the bushing and internal parts out entirely and the die doubles as a body die, which is a handy trick when you want to size the body without touching the neck.

Micrometer Seating for Repeatable Depth

The Competition Seating Die is where a lot of the match accuracy comes from. It uses a sliding sleeve that captures and aligns the case and bullet before any seating pressure is applied, which is how Redding gets such straight, consistent ammo. The micrometer top is calibrated in .001 inch clicks, so recording and returning to a proven seating depth is quick and foolproof when you switch bullets or come back to a load later.

The set ships with the standard profile free-floating seat stem that works well with common bullet shapes. If you run long, high B.C. VLD or ELD-style projectiles, a VLD seat stem is available separately and drops right in. Note that bushings and a shellholder are not included, so grab the right bushing size and a 6.5mm shellholder to go with it. For anyone chasing consistency in a 260 Rem build, this set is hard to beat.

Key Specifications

  • Manufacturer: Redding
  • Caliber: 260 Remington
  • Manufacturer Part Number: 36531
  • UPC: 611760365317
  • Die Set Type: Type S-Match Bushing Full Length, 2-Die Set
  • Dies Included: Type S Bushing Full Length Sizing Die, Competition Seating Die
  • Bushing Increments: .001 inch interchangeable bushings
  • Seating Adjustment: Micrometer, .001 inch increments
  • Thread: 7/8-14 industry standard
  • Material: Steel
  • Bushings: Sold separately
  • Shellholder: Not included
  • Country of Origin: Made in USA

What’s Included

  • Type S Bushing Full Length Sizing Die
  • Competition Seating Die with micrometer adjustment
  • Standard profile free-floating seat stem
  • Adjustable decapping rod with standard size button and decapping pin
  • Plastic storage box
  • Instructions

Frequently Asked Questions

Does the Redding Type S Bushing Full Die Set come with bushings?

No, the bushings are sold separately. This lets you choose the exact bushing size that matches your brass thickness and the neck tension you want. Redding bushings come in .001 inch increments, and Whidden bushings are interchangeable with them if you already have some on hand.

Is a shellholder included with this 260 Remington die set?

No, a shellholder is not included and needs to be purchased separately. The 260 Remington uses the same case head as the 308 family, so you will want a 6.5mm or 308-size shellholder. Pick one up alongside your bushing so you are ready to load.

What is the difference between the Type S Bushing Sizer and a standard full length die?

A standard die sizes the neck to one fixed diameter with a sizing button. The Type S Bushing Sizer uses interchangeable bushings so you set your own neck tension, and the bushing self-centers on the neck for better concentricity and lower runout. It can also be run as a body die by removing the bushing and internal parts.

Can I use VLD bullets with the Competition Seating Die?

The set ships with the standard profile seat stem, which handles most common bullet shapes well. If you load long, high B.C. VLD or ELD-style bullets, Redding offers a VLD seat stem that is sold separately and installs as a direct replacement. It has an internal contact angle better suited to those secant ogive profiles.

Additional information

UPC

611760365317

Manufacturer

Manufacturer Part Number

36531

Reviews

There are no reviews yet.

Be the first to review “Redding Type S-Match Bushing Full Die Set 260 Remington 36531”