0
0

Forster 260 Remington Bench Rest Seater Die – Straight-Line Seating

UPC: 757253007781

$70.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster built the very first die of its kind, and the Bench Rest Seater Die in .260 Remington carries that same design logic that put them on the map. Instead of only guiding the bullet and case neck like a standard seater, this die uses a sliding chamber that captures the entire outside diameter of the sized case before seating begins. That full support is what lines everything up and gives you the straight-line, co-axial seating that serious handloaders chase.

How the .260 Remington Bench Rest Seater Die Keeps Things Straight

The heart of the design is a close-fitting chamber machined with a one-piece reamer, cut specifically for the .260 Remington case. As the bullet goes in, the concentric bullet channel sits just slightly larger than bullet diameter, so the bullet is held true to the case from the moment seating starts. The result is better alignment and lower runout, which usually translates to tighter groups downrange. This is a non-crimping die, so you get clean, consistent seating without any distortion. If you want a crimp, you'd add a separate roll or taper crimp die to your process.

What Comes With the Forster Bench Rest Seater Die

Inside the box you'll find the seater die, a hand-polished seating stem, a die body split lock ring, full instructions, and the die box itself. Forster has refined their seating stems over the years to play nicely with modern bullet shapes, including ballistic tips and VLD-style projectiles, so your long, sleek .260 bullets seat the way they should.

The die adapts to most standard reloading presses. If you're running a Forster Co-Ax press, you won't need a shellholder. On any other press, just grab the shellholder recommended by your press maker. Made in the U.S.A., it's a precision tool that earns its keep on the bench for anyone loading accurate 6.5mm rounds.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: 006011
  • UPC: 757253007781
  • Cartridge: .260 Remington (6.5-08)
  • Die Type: Bench Rest Seater Die
  • Seating Style: Straight-line / co-axial
  • Crimp: Non-crimping
  • Seating Stem: Hand-polished, fits modern bullets
  • Press Compatibility: Adapts to most standard presses
  • Country of Origin: Made in U.S.A.

What’s Included

  • One Forster Bench Rest Seater Die
  • One polished seating stem
  • Die body split lock ring
  • Complete instructions
  • Die box

Frequently Asked Questions

Does the Forster 260 Remington Bench Rest Seater Die crimp the bullet?

No, this is a non-crimping seater die. The non-crimping design is part of what makes it so consistent, since it seats the bullet cleanly without deforming the case mouth. If you need a crimp, you'd add a separate roll or taper crimp die to your loading steps.

Do I need a shellholder with this Forster Bench Rest Seater Die?

It depends on your press. If you're using a Forster Co-Ax press, no shellholder is required. On any other standard press, you'll want the shellholder recommended by your press manufacturer, which is sold separately.

What makes the Bench Rest Seater Die different from a standard seater die?

Instead of guiding just the bullet and case neck, this die uses a sliding chamber that supports the entire outside diameter of the sized case before seating. That full capture is what delivers straight-line, co-axial seating and lower runout. Forster pioneered this design, and it remains one of the most respected straight-line seaters available.

Will this die work with long VLD and ballistic tip bullets in .260 Remington?

Yes. Forster has refined their seating stems over the years to better fit modern bullet shapes, including ballistic tips and VLD projectiles. That makes it a great match for the long, high-BC 6.5mm bullets many .260 Remington shooters prefer.

Additional information

UPC

757253007781

Manufacturer

Manufacturer Part Number

006011

Reviews

There are no reviews yet.

Be the first to review “Forster 260 Remington Bench Rest Seater Die – Straight-Line Seating”