Description
Anyone loading for the 26 or 28 Nosler knows these cases work hard, running at high velocity and generating serious pressure. That's exactly why a good case gage earns its spot on the bench. L.E. Wilson built this one-piece gage to cover both cartridges in a single tool, so you can verify headspace and overall case length without guessing. It's the kind of basic quality-control step that separates ammo that chambers smoothly from ammo that fights you in the field.
How the 26/28 Nosler Case Gage Earns Its Keep
The biggest job this gage does is helping you set up your full-length sizing die the right way. One of the most common reloading mistakes is pushing the shoulder back too far and oversizing brass, which shortens case life and can lead to case-head separation. By measuring a fired case first and then comparing after sizing, you can see precisely how much shoulder bump your die is applying and adjust from there. L.E. Wilson generally recommends roughly .002 inches of setback for bolt guns and a touch more for semi-autos.
Checking Length and Headspace With the Nosler Case Gage
Using it is about as straightforward as reloading tools get. Drop a case in and take a headspace reading at the head with a depth micrometer or calipers. For trim length, set the gage on a flat surface with the case head down, then run a straightedge across the stepped min and max surfaces to see whether the case needs trimming. The stepped machining shows you at a glance if the brass is over length, in spec, or under minimum.
L.E. Wilson has been building precision reloading gear in the USA since the 1930s, and the cartridge case gage traces right back to the company's roots. These gages are machined to tight tolerances that are tough to match with everyday bench tools, which is why they've stayed a favorite among handloaders chasing consistency. If you run a 26 Nosler, a 28 Nosler, or both, this one tool covers you.
Key Specifications
- Manufacturer: L.E. Wilson
- Manufacturer Part Number: CG-N0S
- UPC: 815145026255
- Cartridges: 26 Nosler / 28 Nosler
- Type: One-piece cartridge case gage
- Measures: Headspace and case trim length
- Design: Non-adjustable drop-in gage
- Use With: Fired and resized cases
- Country of Manufacture: United States
What’s Included
- L.E. Wilson 26 Nosler/28 Nosler case gage
Frequently Asked Questions
Does this one case gage really work for both 26 Nosler and 28 Nosler?
Yes. Both the 26 Nosler and 28 Nosler share the same case head and shoulder datum dimensions, so this single gage checks headspace and trim length for either cartridge. It's a two-for-one tool, which makes it handy if you load both.
What do I need besides the 26/28 Nosler case gage to take measurements?
For headspace you'll want a depth micrometer or a set of calipers to read the case head position in the gage. For trim length you just need a flat surface and a straightedge to run across the min and max steps. The gage itself does the referencing, and your measuring tool reads the numbers.
Can I use the Nosler case gage with brand new or unfired brass?
The gage is designed around fired and resized cases, since the whole point is to measure how your chamber and your sizing die affect the brass. L.E. Wilson's preferred method is to measure cases in as-fired condition first, then check again after sizing to confirm your shoulder bump. You can still drop unfired brass in to check length, but the real value shows up with fired cases.
Will this gage check case body diameter or bullet seating?
No, this gage focuses on headspace and overall case length rather than body diameters. It's built to give you a basis for setting up full-length sizing and trimming. For a complete workflow you'd pair it with your sizing die, a trimmer, and your calipers or micrometer.



Reviews
There are no reviews yet.