Description
The Redding Type S Bushing Full Length Sizing Die gives .243 Winchester handloaders real control over the one thing that quietly makes or breaks accuracy: neck tension. Instead of a fixed inside diameter like a standard sizer, this die runs interchangeable sizing bushings available in .001" increments, so you can size the body, bump the shoulder, and set your neck exactly where you want it in a single pass through the press.
One of the smart touches here is the way the bushing floats. It self-centers on the case neck as the brass comes up into the die, which helps keep runout low and your loaded rounds concentric. That matters a lot on a cartridge like the .243 Win that gets used for everything from varmints to deer to paper punching, where a little consistency goes a long way.
Dialing In Your 243 Winchester With the Type S Die
The adjustable decapping rod lets you position the bushing so you can size only part of the neck length when you want to leave a little unsized brass near the shoulder. The die ships with a standard size button plus a decapping pin retainer, so if you neck-turn your brass for uniformity you can pull the button and size strictly off the bushing. That flexibility is a big part of why the Type S line has such a loyal following among precision reloaders.
Picking the Right Bushing
Bushings are sold separately so you can match them to your exact brass and the neck tension you're after. The common approach is to measure the neck wall thickness of your loaded rounds with a ball micrometer, then subtract a thousandth or two for tension to land on your bushing size. A handy bonus: pull the bushing and the internal parts and this same die works as a body die.
Redding builds these to the standard the name is known for, and they're a go-to for folks chasing tight groups with their .243.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 77114
- UPC: 611760771149
- Cartridge: .243 Winchester
- Die Type: Type S Bushing Full Length Sizing Die
- Bushing Increments: .001" increments
- Bushings Included: No, sold separately
- Decapping Rod: Adjustable
- Gun Type: Rifle
- Quantity: 1 die
What’s Included
- One Redding Type S Bushing Full Length Sizing Die (.243 Winchester)
- Adjustable decapping rod with standard size button
- Decapping pin retainer
Frequently Asked Questions
Does the 243 Winchester Type S die come with bushings?
No, this die is supplied without bushings so you can choose the exact size for your brass and preferred neck tension. Bushings are sold separately in .001" increments, in both steel and titanium nitride. This lets you tune the die precisely to your load rather than being locked into a fixed neck diameter.
How do I know which bushing size to order for my .243?
Measure the neck wall thickness of a few loaded rounds with a ball micrometer and average the readings to find your loaded neck diameter. Then subtract a thousandth or two from that number for neck tension, and that result is your bushing size. Many reloaders keep a couple of bushings on hand to fine-tune tension for different bullets and brass.
Does this die full-length size the case or just the neck?
This is a full length sizing die, so it sizes the body, bumps the shoulder, and controls the neck all in one stroke. The bushing handles the neck while the die body takes care of the rest. If you pull the bushing and internal parts, it can also be run as a body die.
Can I use this die if I neck-turn my brass?
Yes. The die includes a decapping pin retainer you can swap in place of the standard size button, which lets you size strictly off the bushing without the expander dragging through the neck. That setup is popular with folks who turn their necks for uniform thickness.




Reviews
There are no reviews yet.