Description
Forster built the original bench rest seater die decades ago, and the .243 Winchester version carries that same reputation for producing some of the straightest ammo you can load. The heart of the design is a sliding die chamber with a concentric bullet channel just slightly larger than the bullet itself. As you run the case up, the chamber captures the entire case and lines up the case, bullet, and seating stem on a common axis before the bullet ever moves into the neck. The result is low runout and the kind of consistency that shows up on paper when you're chasing tight groups out of your 6mm rig.
What Sets the Forster .243 Bench Rest Seater Die Apart
Instead of relying on the die body to guide the bullet, the sliding sleeve supports the full outside diameter of the case and keeps everything true. The bullet seating stem is hand-polished and has been refined over the years to fit modern projectiles, including ballistic tips and VLD-style bullets. Knurled adjustment knobs make dialing in seating depth easy, and the whole die threads into most standard reloading presses. If you run a Forster Co-Ax press, you won't even need a shellholder.
Loading .243 Winchester With the Bench Rest Seater Die
This is a non-crimping seater, which is exactly what most precision handloaders want for the .243. It focuses purely on seating the bullet straight and at a repeatable depth rather than rolling or taper crimping. If you do want a crimp for a hunting load or a semi-auto, you'd simply add a separate crimp die to your process. For bolt guns and bench work, the no-crimp approach is a feature, not a limitation.
Pair it with a quality sizing die and good brass prep and you've got a setup trusted by thousands of competition and precision shooters. It's made in the USA, built from polished steel, and the sort of tool you buy once and keep on the bench for the life of the rifle.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 005931
- UPC: 757253001222
- Cartridge: .243 Winchester
- Die Type: Bench Rest Seater (Bullet Seating) Die
- Crimp: Non-crimping
- Seating Stem: Hand-polished, refined for modern ballistic tip and VLD bullets
- Adjustment: Knurled knobs for seating depth
- Press Compatibility: Most standard reloading presses; no shellholder needed with Forster Co-Ax press
- Material: Polished steel
- Country of Origin: Made in the USA
- Quantity: 1 die
What’s Included
- One Forster Bench Rest Seater Die (.243 Winchester)
- One polished bullet seating stem
- Die body split lock ring
- Complete instructions
- Die storage box
Frequently Asked Questions
Does the Forster Bench Rest Seater Die crimp the bullet?
No, this is a non-crimping seater die. It's designed purely to seat bullets straight and at a consistent depth, which is what most precision .243 loaders are after. If you want a crimp, you'd add a separate roll or taper crimp die to your loading process.
Do I need a shellholder to use this .243 Winchester seater die?
If you're running it in a standard reloading press, yes, you'll use the appropriate shellholder for the .243 Winchester case. If you're loading on a Forster Co-Ax press, a shellholder isn't needed since the press uses its own jaw system.
How does the Forster Bench Rest Seater Die produce straighter ammo?
It uses a sliding die chamber with a concentric bullet channel just slightly larger than the bullet. That chamber captures the entire case and aligns the case, bullet, and seating stem on a common axis before the bullet enters the neck, which keeps runout low and seating consistent.
Will this die work with modern ballistic tip and VLD bullets in .243?
Yes. Forster has refined its seating stems over the years to better fit newer projectiles, including ballistic tips and very low drag bullets. If you load a specialized profile, a replacement stem is available separately if you ever need one tuned to your exact bullet.





Reviews
There are no reviews yet.