Description
If you're loading 224 Valkyrie and chasing tighter groups, bullet seating is where a lot of the accuracy gets made or lost. Lee's Precision Micrometer Bullet Seating Die gives you dead-length seating with a micrometer head that reads just like a depth micrometer, so you can set your seating depth, write it down, and come right back to it later without guessing.
The micrometer thimble and body are laser engraved in divisions of .001 inch, and the adjustment is smooth with no clicks, which makes small tweaks easy when you're working up a load. The seating stem is machined and burnished to seat nearly any point style bullet without marking or deforming the nose, so your boat-tails and tipped match bullets come out clean.
What the Floating Bullet Guide Does for Your 224 Valkyrie Loads
The case mouth and bullet are held in alignment by a floating bullet guide with radial clearance, letting the case and guide line up with the seater screw before the bullet ever starts into the neck. Lee's testing shows this sliding guide design produces some of the lowest runout you'll see, which matters a lot with the long, high-BC bullets the Valkyrie was built around.
Seat and Crimp in One Step with the 224 Valkyrie Micrometer Seater
One feature reloaders appreciate here is the reversible bullet guide. Unthread it and flip it over, and the die can seat and crimp in a single operation, which is handy for ammo headed into a semi-auto. Keep in mind the dead-length benefit steps aside when you crimp and seat together, so most folks seating for pure precision leave it set up dead-length and run a separate crimp die if they want one.
This die uses the standard 7/8-14 thread, so it threads right into any standard single-stage or turret press. It's a well-built, straightforward tool that proves precise seating doesn't have to break the bank, and it carries Lee's reputation for giving you serious capability without the serious price tag.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92310
- UPC: 734307923105
- Cartridge: 224 Valkyrie
- Die Type: Micrometer Bullet Seating Die
- Gun Type: Rifle
- Thread: 7/8-14 Standard
- Micrometer Divisions: .001 inch
- Seating Style: Dead Length
- Bullet Guide: Floating, reversible for seat-and-crimp
- Quantity: 1 die
- Country of Origin: Made in USA
What’s Included
- 224 Valkyrie Precision Micrometer Bullet Seating Die (1)
- Instructions
Frequently Asked Questions
Does the 224 Valkyrie micrometer seating die also crimp?
It can. The floating bullet guide is reversible, so you unthread it, flip it over, and reinstall it to seat and crimp in one operation. Just know that the dead-length seating benefit isn't available while crimping and seating together, so if you want the most consistent overall length you're better off seating dead-length and running a separate crimp die.
Will this die fit my press?
Yes. It uses the standard 7/8-14 thread, which is the industry standard for single-stage, turret, and most progressive presses. If your press takes common reloading dies, this one threads right in.
What makes this a micrometer die versus a standard seating die?
The micrometer head is laser engraved in .001 inch divisions and reads just like a precision depth micrometer, with smooth clickless adjustment. That lets you record your seating depth and return to the exact same setting later, which is a big help when you're developing loads or switching between bullet weights.
Does the seating stem work with pointed match bullets?
It does. The seating stem is machined and burnished to seat nearly any point style bullet without damaging or marking the nose. That's important with the long, high-BC bullets the 224 Valkyrie is known for, since a marred tip can hurt your consistency downrange.





Reviews
There are no reviews yet.