$79.20
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you've spent time at a loading bench chasing better concentricity, you already know the Wilson name. This 224 Valkyrie Bullet Seating Die uses Wilson's chamber-type design, which fully captures the case and the bullet inside the die before anything moves. That tight containment is the whole trick here. The case and bullet stay dead aligned while a close-fitting seating stem pushes the bullet straight into the case mouth, which cuts down on the rocking and tilt you can get from looser conventional dies.
This is a hand die, meaning it's built to run with a mallet or an arbor press rather than a threaded 7/8-14 reloading press. You drop a primed, charged case into the die, set the bullet, and seat it with a few taps or a smooth pull of the arbor handle. Because the case and bullet are both held captive during that stroke, you get the kind of repeatable seating depth and low runout that bullet seating die reviews consistently point to as Wilson's calling card. It's a straightforward process once you've done a handful, and it's hard to beat for consistency.
Precision shooters have leaned on Wilson chamber-type seaters for generations, and this die carries the same reputation into the 224 Valkyrie. The caliber was built around long, high-BC .22 bullets stretched out past typical AR magazine length, so seating depth consistency matters a lot for tuning accuracy. Pairing this seater with a quality arbor press gives you clean feedback through the stroke and tight, repeatable results round after round.
It's machined in the USA and marked clearly so there's no second-guessing which caliber you've got on the bench. If you're building precise 224 Valkyrie ammo for a bolt gun or a tuned gas gun, this is the kind of tool that earns its spot in the loading kit and stays there.
No, this is a Wilson chamber-type hand die designed for use with an arbor press or a mallet. It does not thread into a conventional 7/8-14 reloading press. If you want a die for a standard press, you'd want a threaded seater instead.
This is the standard chamber-type seater, which adjusts seating depth through the cap screw with 3/8-24 threads rather than a micrometer top. L.E. Wilson does offer a separate stainless micrometer-top version if you want click adjustments in .001 increments. This model keeps things simple and relies on the chamber-type alignment for its accuracy.
The chamber-type design fully captures both the case and bullet before seating, holding them in alignment while the stem pushes the bullet straight in. That setup is known for excellent concentricity and low runout, which is why it's a staple among benchrest shooters. For a caliber built around long, high-BC bullets like the 224 Valkyrie, that consistency really pays off.
You'll want an arbor press for the smoothest, most repeatable seating, though a mallet works in a pinch. You'll also need your sizing and other prep dies separately, since this is a dedicated seating die and not a full set. Many loaders pair it with a Wilson full length or bushing sizer in the same caliber.
| UPC | 815145026941 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BS22-4VAL |
You must be logged in to post a review.
Reviews
There are no reviews yet.