$283.36
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
L.E. Wilson has been building precision reloading tools for around 90 years, and this 223 Remington kit is a great look at why handloaders chasing tight groups keep coming back to them. It's a complete stainless steel package that brings together three of the shop's most useful tools for building accurate 223 Rem and 5.56 ammo, all packed in a protective storage box so everything stays organized on the bench.
The heart of the kit is the bushing type full length sizing die. Unlike a standard full length die that leans on an expander ball, this one uses interchangeable bushings to size the case neck to the exact tension you want while squaring up the case body and shoulder in the same stroke. That means less brass working, longer case life, and the freedom to fine-tune neck grip just by swapping a bushing when you change bullets or brass. It features standard 7/8-14 threads, so it runs in just about any common reloading press. The die ships with an adjustable depth decapping rod and a spare decapping punch, and it does not include an expander. Worth noting up front: the neck sizing bushings are sold separately, so you'll want to pick the right one for your loaded round diameter.
The second piece is Wilson's stainless steel micrometer bullet seater. The micrometer top lets you adjust seating depth in clean .001 inch increments, and the design holds both bullet and case in tight alignment as the bullet goes in, which is a big part of keeping runout low. Keep in mind this is a hand die built for use with a mallet or an arbor press, not a conventional threaded press. Rounding out the set is the case length headspace gauge, a one-piece non-adjustable cylinder tool that lets you check case length from base to shoulder and confirm your resized brass and finished rounds measure up against minimum chamber dimensions.
For anyone loading precision 223 Remington or 5.56 on a budget of patience and detail, this kit covers sizing, seating, and measuring in one tidy box. Machined from heat treated stainless steel and made in the USA, it's the kind of gear that earns a permanent spot on the bench.
Yes. The sizing bushings are not included and are sold separately so you can choose the exact size for your load. To figure out your size, measure the diameter of a loaded round where the bullet sits in the neck, then subtract about .002 to .003 inch. That gives you the neck tension that best fits your brass and bullet combination.
No. The micrometer seater in this kit is a hand die designed for use with a mallet or an arbor press, not a conventional threaded press. The bushing full length sizing die, on the other hand, uses standard 7/8-14 threads and works fine in most common presses.
It does not. The bushing design controls neck tension through interchangeable bushings instead of an expander ball, which reduces how hard you work the brass and helps extend case life. If your necks aren't a uniform wall thickness, some reloaders add a separate mandrel step to even out tension.
It's a one-piece, non-adjustable cylinder gauge that checks case length from the base to the shoulder along with maximum case length. You use it to compare resized cases and finished rounds against minimum chamber dimensions, so you can confirm your ammo is squared away on case length and headspace before it goes in the rifle.
| UPC | 815145028822 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | KBFC-223R |
You must be logged in to post a review.
Reviews
There are no reviews yet.