Description
This is Redding's Type S Match setup built specifically for the 223 Ackley Improved 40-degree cartridge, and it's the kind of two-die set precision handloaders reach for when chasing tight groups. It pairs a Type S Bushing Full Length Sizing Die with a Competition Bullet Seating Die, giving you serious control over two of the most important parts of a loaded round: neck tension and seating depth.
The beauty of the bushing system is that you pick the amount of sizing. The full-length sizer uses interchangeable bushings that set the amount of external neck sizing, available in .001 inch steps, so you can tune neck tension to your brass and your load rather than settling for whatever a standard die gives you. The bushings self-center on the case neck to improve concentricity, and the adjustable decapping rod lets you size only part of the neck length when you want to. Pull the bushing and the internals and the sizer can even double as a body die. Keep in mind the bushings and shellholder are sold separately, so you'll want to grab the right bushing for your measured loaded neck diameter.
What the Type S Bushing Sizer Brings to Your 223 Ackley Brass
Since the Ackley Improved chamber reforms your brass off standard 223 Rem cases, full-length sizing with precise neck control helps your fire-formed brass stay uniform and chamber smoothly. This die sizes the case body and bumps the shoulder while you independently manage the neck, which is exactly what you want for consistent, repeatable rounds.
Dialing In the Competition Seating Die
The Competition Bullet Seating Die is where the fine-tuning happens. It uses a micrometer adjusting head calibrated in .001 inch increments plus a sliding sleeve that aligns the case and bullet before seating, which cuts down on runout and keeps your seating depth repeatable. It ships with a standard seating stem that handles most bullet profiles, and a VLD stem is available separately if you shoot long, sleek match bullets. One note worth passing along: this seater isn't meant for heavily compressed loads.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 36907
- UPC: 611760369070
- Cartridge: 223 Ackley Improved (40 degree)
- Die Type: Type S Match Bushing Full Length
- Set Configuration: 2-Die Set
- Sizing Die: Type S Bushing Full Length Sizing Die
- Seating Die: Competition Bullet Seating Die with micrometer
- Micrometer Increments: .001 inch
- Bushing Adjustment: .001 inch increments (bushings sold separately)
- Material: Steel
- Shellholder: Sold separately
What’s Included
- Type S Bushing Full Length Sizing Die with decapping rod
- Standard sizing button
- Decapping pin retainer (for externally sized brass)
- Competition Bullet Seating Die with sliding sleeve and micrometer adjusting head
- Standard seating stem
- Die box
- Instructions
Frequently Asked Questions
Does the 223 Ackley Improved die set come with bushings?
No, the bushings are sold separately so you can match them to your exact brass and the neck tension you want. Measure the neck diameter of a loaded round, then select a bushing that gives you your preferred amount of sizing, typically one or two thousandths under that measurement. Redding offers bushings in .001 inch increments.
Do I need a shellholder for this set?
Yes, and it's not included. The 223 Ackley Improved uses the same shellholder as standard 223 Remington, so if you already reload 223 Rem you likely have what you need. If not, you'll want to pick one up alongside the set.
What's the difference between the Type S bushing sizer and a standard full-length die?
A standard full-length die sizes the neck a fixed amount with no adjustability. The Type S bushing sizer lets you choose the exact neck tension by swapping bushings, and the bushing self-centers on the case neck to improve concentricity. It also lets you size only part of the neck by adjusting the decapping rod.
Can the Competition Seating Die handle long VLD bullets?
The die ships with a standard seating stem that works with most common bullet profiles. If you're loading long, pointed VLD or match bullets, Redding sells a VLD seating stem separately that matches the ogive better and reduces the chance of marking the bullet. The micrometer head makes dialing in seating depth quick and repeatable either way.





Reviews
There are no reviews yet.