$135.52
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson Micrometer Top Bullet Seater for 222 Remington is one of those tools that earns its keep the moment you start chasing tight groups. Instead of threading into your press like a conventional seater, this is a chamber type inline die meant to be run with an arbor press. The case and bullet are fully captured inside a chamber that mirrors your rifle's, then a close-fitting seater stem pushes the bullet straight down. Everything stays aligned through the whole stroke, and the fit between stem and body is tight enough that it practically pulls a vacuum. The result is bullets seated dead straight with minimal runout.
Conventional 7/8-14 seating dies rely on moving collars and built-in tolerances that can let a bullet tip ever so slightly off center. Wilson's inline design takes the guesswork and the wobble out of the equation. Because the case and bullet are already locked in alignment before the stem ever touches the bullet, you get the kind of concentricity that competitive 222 Rem shooters count on. Benchrest crowds have leaned on these for generations, and the design has carried over into F-Class, High Power, PRS, and plenty of other accuracy-driven disciplines.
The micrometer head is the real convenience here. It lets you adjust seating depth in clean .001 inch increments with a laser-etched scale that's easy to read and easy to return to. Found your node? Write down the number and you can come right back to it. When you need a bigger jump, the 3/8-24 TPI threads in the cap handle the major adjustments. It's compact enough to toss in your range bag so you can tweak your COAL right on the bench while you're load testing.
Wilson machines these seaters from solid 416 and 303 stainless steel, so corrosion and wear aren't things you'll worry about. This is a buy-it-once piece of gear that'll outlast a lot of the rifles you run it for. If you reload 222 Remington and care about what comes off the muzzle at distance, this die belongs on your bench.
An arbor press is the recommended way to run this die and gets you the best feel and consistency. That said, Wilson's chamber type seaters can also be used without a press by tapping the stem with a soft-faced hammer in a pinch. For regular load development, pairing it with a small arbor press is the way to go.
The case and bullet are completely captured inside a chamber that mirrors your rifle before the bullet is ever pushed in, so everything is aligned ahead of time. A close-fitting seater stem then drives the bullet straight down the center axis. That eliminates the collar tolerances and movement found in conventional 7/8-14 dies, which is why you see much lower runout.
The micrometer head adjusts in .001 inch increments with a laser-etched scale that's easy to read and repeat. When you need to make a larger change, the 3/8-24 TPI threads in the cap handle the bigger moves. It makes dialing in and returning to a proven seating depth quick and repeatable.
This die ships with the standard seater stem, which covers most common bullet shapes in 222 Rem. If you're running long, pointed VLD or boat tail match bullets, a VLD stem is offered separately and may give you a better nose fit. Many reloaders keep both on hand for different projectiles.
| UPC | 815145022448 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | S22-2RM |
You must be logged in to post a review.
Reviews
There are no reviews yet.