$17.60
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you run a Wilson Case Trimmer and shoot the 222 Remington Magnum, this is the holder that keeps your brass square and true through every prep step. The L.E. Wilson Fired Case Holder cradles the case by its body taper instead of gripping the head, which means the case sits the same way a chamber supports it. That design is the whole reason Wilson trimmers have such a loyal following with precision and benchrest crowds. It also fits the 6x47mm, so if you dabble in that wildcat you're covered with the same tool.
The holder isn't just for trimming to length. Once your case is seated, you can use the same setup for primer pocket reaming, neck reaming, and deburring with the Wilson Uniform Deburring Tool, which is sold separately. The fired version is dialed in for neck-sized brass, where the case body has already expanded to fit your chamber. Drop the case in, give the head a light tap on a firm surface to seat it, and run your trimmer. When you're done, a tap on the case mouth backs it right out.
Machined from steel and made in the U.S.A., this holder is the kind of tool you buy once and hand down. L.E. Wilson has been a family-run shop since 1927 and has been turning out case holders and trimmers since 1936, so the lineage here is real. The tolerances are tight on purpose, and that repeatability is what separates uniform brass from brass that's all over the map.
Keep in mind this is a holder only. It works in conjunction with the Wilson Case Trimmer rather than on its own, so you'll want that base tool to put it to work. For anyone chasing clean, consistent 222 Rem Mag brass, it's a small piece that makes a big difference on the bench.
It's designed to be used in conjunction with the L.E. Wilson Case Trimmer. The holder itself doesn't trim on its own, so you'll need the Wilson trimmer as your base. You can also use it for primer pocket reaming, neck reaming, and deburring with the Wilson Uniform Deburring Tool, which is sold separately.
Yes. The CH-222RM also fits the 6x47mm, which shares the same case dimensions, so one holder covers both if you shoot either one.
L.E. Wilson lists fired case holders for neck-sized brass, where the case body has already expanded to match your chamber. New case holders are sized for brand new or full-length resized brass. Matching the holder to your brass prep is what gives you that snug, chamber-like fit.
Set the case into the holder and tap the case head lightly on a firm surface to seat it, then place the whole thing in the trimmer. When you're finished, a tap on the case mouth pops it loose. Cases are held by body taper rather than the head, so no shell plate or collet is involved.
| UPC | 815145020468 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CH-222RM |
You must be logged in to post a review.
Reviews
There are no reviews yet.