$38.72
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're loading for the 222 Remington and want tighter, more consistent brass, the L.E. Wilson Case Gage is one of those quiet little tools that earns its spot on the bench fast. It's a one-piece, non-adjustable steel gage machined to match minimum SAAMI chamber dimensions, so a quick drop of a case tells you exactly where your shoulder and case length sit. No moving parts, no calibration, just reliable reference you can trust load after load.
L.E. Wilson has been building reloading tools since 1927, and the Case Gage itself dates back to 1935, when founder Sam Wilson came up with it to help a fellow shooter solve a case-separation problem. That same basic design is still doing the job today, which says plenty about how well it works.
The process is simple. Drop a fired case into the gage, then use a caliper or depth micrometer to read how it sits against the datum. That tells you how much your shoulder needs to move during full length sizing so you're bumping it back just enough to chamber smoothly without overworking the brass. Once a case is sized, set the gage head-down on a flat surface and sight across the top to check it against the min and max trim marks. That's your cue on when it's time to trim.
The biggest payoff here is control. Oversizing is one of the most common mistakes in reloading, and it shortens case life while hurting consistency. Being able to see your shoulder setback means straighter chamber fit, better pressure control, and brass that lasts more firings. It's especially handy for bolt gun and precision work where small differences show up on paper.
One thing worth noting so you know what you're getting: the gage checks overall length and datum-to-head length, but it does not measure body diameters. It's built to be used with fired cases as your baseline for sizing and trimming, and it does that one job very well.
It checks two things: overall case length so you know when to trim, and datum-to-head length so you can set your shoulder correctly and avoid oversizing. You drop a case in and use a caliper or depth micrometer to read where it sits. It does not measure case body diameters.
Yes. Checking a fired case gives you a baseline for how much to set your shoulder back during full length sizing, and checking a resized case confirms you bumped it the right amount. It also doubles as your trim-length reference once the brass is sized.
No, this is a one-piece, non-adjustable steel gage machined specifically for the 222 Remington. There's nothing to set or calibrate, which keeps it simple and consistent. L.E. Wilson makes adjustable versions for belted magnum cases, but a straight rimless cartridge like the 222 doesn't need one.
A case gage shows you exactly how far your shoulder is being pushed back, which is the most common way reloaders accidentally overwork their brass. Reading against the gage lets you size just enough for reliable chambering while extending case life. It's one of the best ways to tighten up consistency, especially for bolt action and precision loads.
| UPC | 857949005432 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | CG-222R |
You must be logged in to post a review.
Reviews
There are no reviews yet.