Description
The 222 Remington Type S Bushing Full Length die from Redding is built for handloaders who want more than just a standard resize. It full length sizes the entire case body and bumps the shoulder back while giving you exact control over the case neck, all in one stroke of the press. That combination makes it a favorite among benchrest crowds and anyone chasing tight groups out of their 222 Rem.
How the 222 Rem Type S Bushing Die Earns Its Keep
Instead of working the neck with a fixed-diameter button, this die uses interchangeable bushings available in .001 inch increments. You pick the bushing that matches your brass and bullet combo, which lets you set neck tension exactly where you want it rather than overworking the brass every cycle. The bushing floats and self-centers on the case neck, and that free movement is a big part of why these dies produce such good concentricity and runout numbers. Less working of the brass also means longer case life, which anyone loading a lot of 222 will appreciate.
Dialing In Your Redding Type S Setup
The adjustable decapping rod lets you reposition the bushing so you can size only part of the neck length if that's how you like to run things. It ships with both a standard sizing button and a decapping pin retainer, so you can run it the conventional way or go bushing-only for brass you've neck turned for uniformity. If you ever want to just bump the shoulder and leave the neck alone, pull the bushing and internals and the die works as a straight body die. That's three jobs out of one tool.
What to Know Before Ordering
Keep in mind the bushings and shellholder are sold separately, so plan on grabbing the right bushing size for your particular brass. A common starting point is to measure a loaded round's neck diameter and choose a bushing roughly .003 to .005 inches under that. Once you've got it set, this is the kind of die that quietly makes your handloads better round after round.
Key Specifications
- Manufacturer: Redding
- Cartridge: .222 Remington
- Die Type: Type S Bushing Full Length Sizing Die
- Bushing Adjustment: Interchangeable bushings in .001 inch increments
- Decapping Rod: Adjustable, repositions bushing for partial neck sizing
- Body Die Capability: Yes, with bushing and internals removed
- Manufacturer Part Number: 77109
- UPC: 611760771095
What’s Included
- One Redding Type S Bushing Full Length Sizing Die
- Adjustable decapping rod
- Standard sizing button
- Decapping pin retainer
- Instructions
- Die box
Frequently Asked Questions
Do bushings come with the 222 Remington Type S die?
No, the bushings are sold separately so you can choose the exact size that matches your brass and bullet combo. A good rule of thumb is to measure the neck diameter of a loaded round and pick a bushing about .003 to .005 inches smaller. This lets you set neck tension precisely rather than being locked into one fixed diameter.
Can this Redding Type S die be used as a body die?
Yes. By removing the bushing and all the internal parts, the Type S Bushing Full Length die works as a straightforward body die for bumping the shoulder without touching the neck. That versatility makes it a handy single tool for several different sizing jobs.
What's the difference between the sizing button and the decapping pin retainer?
The die ships with both. The standard sizing button works the neck from the inside as the case comes off the rod, which is great for commercial brass used as-is. The decapping pin retainer replaces the button so you can rely solely on the bushing for neck sizing, which is the preferred setup for folks who neck turn their brass for uniformity.
Do I need a shellholder for this 222 Remington die?
Yes, a shellholder is required and is sold separately. You'll want the correct shellholder sized for the 222 Remington case head. Many reloaders already have the right one if they load other cartridges in the same family.




Reviews
There are no reviews yet.