Description
If you load 22 GT and care about concentricity, the Forster Bench Rest Seater Die is one of the most proven tools you can put on your bench. Forster was the first to bring this style of seater to market, and decades later it's still the benchmark other straight-line seaters get measured against. The whole idea is simple but effective: hold everything in perfect alignment so the bullet goes in dead straight, every time.
How the 22 GT Bench Rest Seater Die Keeps Things Straight
The heart of this die is a close-fitting sliding die chamber that's machined with a one-piece reamer specific to the 22 GT cartridge. As you run the case up, that chamber captures the entire case for its full length and holds the case, bullet, and seating stem on a common axis before the bullet is ever pressed in. The bullet channel is just slightly larger than bullet diameter, which is what gives you that coaxial, low-runout result bench rest and precision folks are after. It's a non-crimping design, so if you want a crimp you'll want to add a separate roll or taper crimp die.
Built for the Modern 22 GT Reloader
Forster has kept refining the hand-polished seating stem over the years so it fits today's hybrid, ballistic tip, and VLD-style bullets better, contacting the ogive rather than the fragile tip. Knurled knobs make seating-depth adjustments easy to feel out, and since even five thousandths of seating depth can move your groups, having a stem that seats consistently matters. It's machined from quality steel and hand polished before and after heat treating for a fine finish that lasts.
The die uses Forster's Cross Bolt Die Lock Ring so your settings stay put once dialed in. It threads into standard presses, and if you run a Forster Co-Ax press you won't even need a shellholder. For anyone building precise 22 GT ammo and wanting repeatable, straight-seated rounds, this is the die that gets it done. Made in the U.S.A.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: 5836
- UPC: 757253990892
- Cartridge: 22 GT
- Die Style: Bench Rest Bullet Seating Die
- Crimp: Non-crimping
- Lock Ring: Forster Cross Bolt Die Lock Ring
- Material: Hand-polished steel
- Country of Origin: Made in the U.S.A.
- Item Length: 5.500 in
- Diameter: 0.875 in
- Item Weight: 0.665 lbs
What’s Included
- One Forster Bench Rest Seater Die
- One polished seating stem
- Cross Bolt die lock ring
- Complete instructions
- Die box
Frequently Asked Questions
Does the 22 GT Bench Rest Seater Die crimp the case?
No, this is a non-crimping seater die. It's built purely for straight-line bullet seating with the best possible alignment. If you want a crimp on your 22 GT loads, you'll need to add a separate roll or taper crimp die.
Do I need a shellholder to use this die?
A shellholder is sold separately and is needed for most standard presses. The one exception is if you're running a Forster Co-Ax press, which uses sliding jaws instead of a shellholder. Either way, the die threads into standard presses with no trouble.
What makes the Forster Bench Rest Seater Die better for precision loads?
It uses a close-fitting sliding die chamber that captures the entire case and holds the case, bullet, and seating stem on one common axis before the bullet is seated. That full-length support is what produces very low runout and consistent, straight-seated rounds. Forster pioneered this style of seater and it's still a favorite among precision and bench rest reloaders.
Will this seater work with modern VLD and ballistic tip bullets in 22 GT?
Yes. Forster has refined the hand-polished seating stem over the years to better fit hybrid, ballistic tip, and VLD-style bullets. The stem contacts the bullet on the ogive rather than the tip, which protects fragile bullet points and keeps seating depth consistent.





Reviews
There are no reviews yet.