Description
If you're loading 22 Creedmoor and chasing tight groups, the die you size with matters just as much as your powder charge. Forster's full length sizing die handles the whole job in a single pass: it sizes the case neck and body, bumps the shoulder back to set your headspace, deprimes the case, and expands the neck on the way out. That's a lot of work happening in one stroke, and the way Forster engineers it is what separates this die from the pack.
What Sets the Forster 22 Creedmoor Full Length Die Apart
The standout here is the elevated E-Z Out expander ball. Instead of yanking the expander through a fully sized neck like a lot of conventional dies, Forster raises the ball so the neck passes over it while most of the case is still held captive inside the die. That keeps everything aligned and dramatically cuts down on the neck pulling off-center, which is exactly what you want if runout and consistent neck tension are on your mind. The expander runs about .001 inch under bullet diameter, so after brass springback you land right around .002 inch of bullet grip.
How the 22 Creedmoor Sizing Die Is Built
Forster machines these dies by hand using solid one-piece reamers, which keeps all the internal diameters concentric with each other. The bodies are heat treated and oil quenched to a tough Rockwell hardness, then hand polished before and after heat treating for a slick interior finish. The decapping assembly is adjustable, uses a hardened decapping pin, and the knurled knobs make dialing things in easy without extra tools.
Press Compatibility for the Forster Full Length Sizer
This die ships with the Forster die body ring, so it drops right into a Forster Co-Ax press or any standard 7/8-14 threaded press. If you're running a Co-Ax you won't need a shellholder at all. On a conventional press, you'll want the correct 22 Creedmoor shellholder, which isn't included. Made in the USA, and backed by Forster's reputation for precision glassware that lasts a lifetime.
Key Specifications
- Manufacturer: Forster Products
- Cartridge: 22 Creedmoor
- Die Style: Full Length Sizing Die
- Expander System: Elevated E-Z Out Expander Ball
- Thread: 7/8-14
- Diameter: 0.875 in
- Press Compatibility: Forster Co-Ax and standard threaded presses
- Construction: Hand-reamed, heat treated, oil quenched steel
- Country of Origin: USA
- Manufacturer Part Number: 5135
- UPC: 757253991011
What’s Included
- One Forster 22 Creedmoor full length sizing die
- Decapping assembly with decapping pin and floating expander ball
- Forster die body ring
- One die box
- Complete instructions
Frequently Asked Questions
Does the 22 Creedmoor full length sizing die come with a shellholder?
No, a shellholder is sold separately and isn't included in the box. You'll need the correct shellholder for 22 Creedmoor if you're running a conventional threaded press. If you're using a Forster Co-Ax press, you won't need a shellholder at all.
Will this die work in my standard reloading press?
Yes. It ships with the Forster die body ring and uses standard 7/8-14 threads, so it fits both the Forster Co-Ax press and traditional threaded presses. No special adapter is required.
What makes the E-Z Out expander ball on this Forster die different?
The expander ball sits elevated inside the die so the case neck passes over it while most of the case is still held captive in the die body. That keeps the neck aligned during expansion, which improves concentricity and gives you more consistent neck tension. It's one of the biggest reasons reloaders reach for Forster dies.
Does the 22 Creedmoor sizing die deprime and set headspace too?
It does. In a single stroke this die sizes the case neck and body, bumps the shoulder back to set your headspace, deprimes the case, and expands the neck on the way out. That makes it a true one-pass full length sizer.




Reviews
There are no reviews yet.