.22 CF Proof Positive Jag – Bore Tech Cleaning

Description

The .22 Caliber CF Proof Positive Jag solves a problem every serious rifle cleaner runs into: false copper fouling readings. When using copper removers on traditional brass jags, the brass itself oxidizes and turns patches blue, making it impossible to tell if your barrel is actually clean. This jag cuts right through that confusion by ditching brass entirely.

Instead, Bore Tech machines these jags from a proprietary alloy that sits as soft as brass for barrel safety but with exceptional tensile strength to handle tight patches without bending or snapping. The material is chemically treated and sealed against harsh solvents, so you get real results without the guesswork.

Precision Dual Ring Design for Better Cleaning

Inside the jag, a dual set of four contact rings does the heavy lifting. The first ring on each set is rounded to center itself in your bore and prevent damage during entry. The three squared rings grab and hold your patch firmly in place. Between these ring sets sits a solvent reservoir that feeds fresh cleaner ahead of the patch, then dispenses it out as you push through.

Engineering Built for Reliability

The rear of the jag features a reverse taper that provides a smooth, edge-free transition when paired with Bore Tech's Proof Positive Bore Stix rods. That smooth junction keeps the jag centered and lifts the rod off the bottom of the barrel as you pull back out, protecting your crown and keeping everything true. The jag length is caliber-specific and sized to prevent patches from bunching or jamming on the tip.

Made in the USA and finished with a secondary treatment process, this is a jag built for accuracy-minded rifle owners who care about clean barrels done right.