Description
Anyone who has handloaded .22 caliber bottleneck brass knows the dance: lube the necks, size, then wipe everything down. This Redding carbide size button kit lets you skip a big part of that routine. The carbide button glides through case necks without needing lubrication inside the neck, which means less mess and one less step between you and a finished round. It's a simple upgrade that pays off every time you sit down at the press.
What the Redding Carbide Size Button Does
The heart of this kit is a carbide button that rides free-floating on the decapping rod. That floating design lets it self-center in the case neck as the brass comes down over it, so you get even, consistent sizing instead of a button that fights the neck off-axis. Carbide is slick and hard, which is why it moves through brass so smoothly and holds its dimension round after round. For folks running a lot of .22 and 5.56 brass, that smoother pass through the neck adds up fast.
Fitting the 22 Cal Carbide Sizing Button to Your Dies
This is a .22 caliber (.224) unit built to upgrade Redding sizing dies. You can drop it into a Redding Full Length, Neck, or Type-S sizing die to replace the standard steel expander. Installation is straightforward since the kit includes everything needed to make the swap, and once it's in, your existing die just works better.
What You Get in the Kit
Each kit comes with the carbide size button, a retainer, and a spare decapping pin, so you've got the pieces to install it and a backup pin on hand. It's made in the United States and carries Redding's reputation for precision reloading gear. If you're chasing cleaner, faster neck sizing on your .22 caliber brass, this is one of the easier upgrades to make.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 48223
- UPC: 611760482236
- Caliber: .22 Caliber (.224)
- Product Type: Carbide Size Button Kit
- Design: Free-floating, self-centering on decapping rod
- Lubrication: No inside-neck lube required
- Die Compatibility: Redding Full Length, Neck, and Type-S sizing dies
- Country of Origin: United States
What’s Included
- Carbide size button
- Retainer
- Spare decapping pin
Frequently Asked Questions
What does the Redding 22 caliber carbide sizing button do?
It replaces the standard steel expander in your Redding sizing die with a carbide button that glides through the case neck without needing lubrication inside the neck. Because carbide is hard and slick, it makes inside neck sizing smoother and more consistent. It also floats on the decapping rod so it self-centers in the neck for even sizing.
Which dies will this carbide size button fit?
This kit is designed to upgrade Redding sizing dies, including Full Length, Neck, and Type-S models. It swaps in for the factory expander, so your existing .22 caliber Redding sizing die gets the carbide benefit without buying a whole new die.
Do I still need to lubricate the case necks?
The whole point of the carbide button is to eliminate the need for lubrication inside the neck during sizing, so for fired brass you can usually skip it. Some handloaders note that brand-new virgin brass may still want a touch of graphite or mica when truing up case mouths. For everyday reloading of .22 and 5.56 brass, it saves you that extra step.
What comes in the box with the 48223 kit?
The kit includes the carbide size button, a retainer, and a spare decapping pin. That gives you everything to install it in your die plus a backup pin to keep on the bench. It's made in the United States.




Reviews
There are no reviews yet.