$34.99
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Tipton Deluxe 1-Piece Carbon Fiber Cleaning Rod is built for anyone who wants to clean a rifle bore the right way without chewing up the rifling. At 12 inches long and threaded 8-32, this one is sized for .22 through .26 caliber pistols and short-barreled rifles, and the carbon fiber shaft is where it earns its keep. Carbon fiber won't scratch a bore the way stainless steel can when you get careless, and it won't grab and hold grit the way a coated rod does. That matters, because a rod that picks up abrasive particles is basically running fine sandpaper through your barrel every time you push a patch.
The handle is the part people notice first. It spins on two sets of ball bearings, so as the patch or brush follows the twist of the rifling, the rod rotates on its own instead of fighting you. You get a smooth pass on both the push and the pull, even when a tight patch is under real pressure. Tipton also builds these with a shank-through design, which means the threaded core runs all the way through the handle. If you get a stubborn patch stuck, you can tap the end with reasonable force to work it through rather than yanking on the rod.
Carbon fiber has one more trick going for it: the shaft can flex to an extreme angle and spring right back to straight, so an accidental bend on the bench isn't the end of the rod. The brass tip threads to standard 8-32 jags, brushes, loops, and mops, so it drops right into a kit you may already own. Folks who clean a lot of guns, from casual range days to competition prep, tend to stick with these once they try one. Pair it with a bore guide and your favorite solvent and you've got a setup that treats your barrel gently and lasts a long time.
No. Unlike stainless steel, carbon fiber won't scratch or wear your rifling if it brushes the bore, and unlike coated rods, it won't embed abrasive particles that grind away at your barrel. That's the whole reason to run carbon fiber in the first place.
This rod is sized for .22 through .26 caliber bores, which covers common cartridges like .223/5.56, .243, 6.5, and .257. The 12-inch length is well suited to pistols and shorter-barreled rifles in that range.
The brass tip uses a standard 8-32 thread, so it accepts most jags, bore brushes, patch loops, and mops made for that pitch. If you already own a rifle cleaning kit, the tools you have will very likely thread right on.
The handle spins on two sets of ball bearings, letting the rod rotate freely as it follows the twist of the rifling. That means less drag and a smoother pass on both the push and the pull, even when a tight patch is under pressure.
| UPC | 661120586753 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 658675R |
| Caliber/Gauge | .26 Caliber |
| Style | Rifle |
You must be logged in to post a review.
Reviews
There are no reviews yet.