0
0

Redding 22-250 Remington Competition Bushing Neck Die Set 58106

UPC: 611760581069

$307.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

For the 22-250 Remington reloader who sorts brass, turns necks, and sweats the small stuff, Redding's Competition Bushing Neck Die Set is about as good as it gets. This three-die setup is built around neck sizing, which keeps fire-formed brass tight to your chamber, stretches case life, and holds concentricity better than a standard full-length routine. Everything in the set is aimed at one thing: taking runout out of the equation so your 22-250 shoots to its potential.

What Comes in the 22-250 Competition Bushing Neck Die Set

The set includes a Competition Bushing Neck Sizing Die, a Body Die, and the Competition Seating Die. The neck sizer uses interchangeable bushings (sold separately) so you dial in neck tension to match your brass thickness and bullet. The micrometer head lets you adjust exactly how much of the neck gets sized in .001 inch steps, and you can return to a favorite setting any time. One thing worth noting: the decapping rod does not have an expander button, which is by design for folks running neck-turned or carefully sorted brass. Redding does offer a carbide size button kit separately if you want one.

How the Redding Bushing Neck Die Set Earns Its Keep

Both the neck die and the seater use a precision-ground sliding sleeve that captures and aligns the case before any work happens. On the sizing die, the bushing self-centers on the neck for straight, even sizing. On the Competition Seating Die, that same sleeve holds the case and bullet in line while the micrometer stem sets depth to within a thousandth. The Body Die rounds out the set for when brass gets sticky after repeated firings, letting you resize the body and bump the shoulder without touching the neck.

This is a benchrest-grade tool for serious 22-250 varmint and target work. If you already prep your brass and want consistency you can measure, this set belongs on your bench.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 58106
  • UPC: 611760581069
  • Caliber: 22-250 Remington
  • Die Set Type: Competition Bushing Neck Die Set (3-Die)
  • Bullet Diameter: 0.224 in
  • Included Dies: Bushing Neck Sizing Die, Body Die, Competition Seating Die
  • Neck Sizing: Interchangeable bushings (sold separately)
  • Bushing Range: 0.244 in to 0.252 in
  • Adjustment: Micrometer, calibrated in .001 inch increments
  • Thread: 7/8-14
  • Shellholder: #1 (sold separately)
  • Country of Manufacture: USA

What’s Included

  • Competition Bushing Neck Sizing Die with micrometer head
  • Body Die
  • Competition Seating Die with micrometer head and standard seating stem
  • Die box
  • Instructions

Frequently Asked Questions

Are the neck bushings included with the Competition Bushing Neck Die Set?

No, the neck sizing bushings are sold separately. That is by design, since it lets you pick the exact bushing diameter for your brass and bullet combination. For 22-250 Remington, this die uses bushings in the 0.244 to 0.252 inch range. A common starting point is to measure the neck diameter of a loaded round and subtract about .001 to .002 inch.

What is the difference between neck sizing and full-length sizing with this set?

The bushing neck die sizes only the case neck, which keeps the brass fitted to your chamber and tends to extend case life. The included Body Die handles full-length body sizing and shoulder bump when cases start getting tough to chamber after repeated firings. Running both together gives you the control of neck sizing with a fix for brass that needs it.

Does the Competition Seating Die use a micrometer?

Yes. The Competition Seating Die has a micrometer-adjustable head calibrated in .001 inch increments, so you can set seating depth precisely and return to it later. A precision-ground sliding sleeve captures and aligns the case and bullet before seating, which cuts down on runout. It ships with a standard seating stem that handles most bullet shapes.

Do I need a shellholder for the 22-250 Remington die set?

Yes, and the shellholder is sold separately. For 22-250 Remington you will want a #1 shellholder. The dies use a standard 7/8-14 thread, so they fit standard single-stage reloading presses.

Additional information

UPC

611760581069

Manufacturer

Manufacturer Part Number

58106

Reviews

There are no reviews yet.

Be the first to review “Redding 22-250 Remington Competition Bushing Neck Die Set 58106”