Description
The 22-250 Remington Type S Bushing Full Length Die from Redding tackles a problem every precision handloader runs into: how to properly size the case body and bump the shoulder without over-working the neck. Instead of a fixed neck diameter that squeezes your brass more than it needs, this die runs an interchangeable bushing that lets you control neck tension to the thousandth. You pick the bushing that matches your loaded round, drop it in, and the die handles the rest.
How the 22-250 Type S Bushing Die Earns Its Keep
The bushing self-centers on the case neck as it sizes, which helps keep runout low and concentricity tight. That matters when you're chasing small groups, since inconsistent neck tension is one of the quiet accuracy killers at the bench. The die sizes the full body, sets your shoulder bump, and controls external neck sizing all in one pass through the press, so you're not juggling multiple dies for a job that should take one pull of the handle.
Dialing In Neck Tension With the Redding 22-250 Die
Redding offers bushings in .001" increments, so you can fine-tune how much grip the neck holds on the bullet. The adjustable decapping rod lets you move the bushing's position up or down, meaning you can size only part of the neck length if you want to leave a portion untouched. It ships with a standard size button and a decapping pin retainer, giving you the option to run it with or without the button depending on how you like to work your brass. Strip the bushing and internal parts out entirely and the die doubles as a body die.
Built to the standard Redding reputation for consistency and long service life, this is a die you set up once and trust load after load. Keep in mind the die is supplied without bushings, so you'll want to grab the bushing size that fits your chamber and brass separately. The correct shellholder for the 22-250 is a #1 if you need one for your setup.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 77106
- UPC: 611760771064
- Caliber: 22-250 Remington
- Die Type: Type S Bushing Full Length Sizing Die
- Thread Size: 7/8"-14
- Bushing Increments: .001"
- Bullet Diameter: 0.224"
- Recommended Shellholder: #1
- Decapping Rod: Adjustable
- Country of Origin: USA
What’s Included
- One Redding Type S Bushing Full Length Sizing Die
- Decapping rod
- Standard size button
- Decapping pin retainer
- Die box
- Instructions
Frequently Asked Questions
Does the 22-250 Type S bushing die come with bushings?
No, this die is supplied without bushings. You'll need to choose the bushing that matches your loaded cartridge neck diameter, available in .001" increments, and order it separately. This lets you tune neck tension exactly to your brass and chamber.
What shellholder do I need for the Redding 22-250 Type S die?
The 22-250 Remington uses a standard #1 shellholder. The shellholder is not included with the die and is sold separately. Most reloaders already have one if they've loaded cartridges that share the same case head.
Can this Type S full length die be used as a body die?
Yes. By removing the bushing along with all the internal parts, the Type S full length die works as a body die. That gives you one more way to get use out of a single tool depending on how you want to work your brass.
What's the advantage of a bushing die over a standard full length die?
A standard die has a fixed neck diameter that often sizes the neck more than necessary, which overworks the brass. The bushing design lets you control exactly how much the neck is sized and how much tension holds the bullet, and the bushing self-centers to help improve concentricity. That control is a big deal for precision loads.




Reviews
There are no reviews yet.