Description
The Redding Type S-Match Bushing Full Length Die Set for 22-250 Remington is built for handloaders who want full length sizing without giving up control of the case neck. This two-die set pairs a Type S Bushing Full Length Sizing Die with a Competition Bullet Seating Die, so you can size the case body, bump the shoulder, and set your neck tension all in one stroke. It carries the MPN 36106 and is a favorite among benchrest and precision rifle crowds who demand repeatable results round after round.
How the 22-250 Type S Sizing Die Works
The sizing die uses interchangeable bushings in .001 inch increments, which means you dial in exactly the neck tension your load likes instead of settling for whatever a standard die gives you. The bushing is free to self-center on the case neck, and that floating action is a big part of what keeps your loaded rounds concentric. An adjustable decapping rod lets you reposition the bushing to partially size the neck when you want to, and the die ships with a standard size button plus a decapping pin retainer. Pull the bushing and internals out entirely and the same die doubles as a body die.
Dialing In the Competition Seater
The Competition Bullet Seating Die is where this set earns its keep. It features a micrometer head calibrated in .001 inch increments for fast, repeatable seating depth changes, along with a floating seating system that aligns the bullet and case before the bullet ever starts into the neck. That alignment is what cuts down runout and keeps groups tight.
What to Know Before You Load
Every Redding die uses the industry standard 7/8-14 threaded body, so it threads right into any common single stage or turret press. Keep in mind the set does not include bushings or a shellholder, so you'll want to grab the correct bushing for your brass and a #1 shellholder to get rolling. Bushings come in heat-treated steel or with a Titanium Nitride coating if you'd rather reduce drag on the brass during sizing.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 36106
- UPC: 611760361067
- Cartridge: .22-250 Remington
- Die Set Type: Type S-Match Bushing Full Length
- Dies Included: Type S Bushing Full Length Sizing Die, Competition Bullet Seating Die
- Bushing Increments: .001 inch interchangeable
- Seater Adjustment: Micrometer, .001 inch increments
- Thread: 7/8-14 industry standard
- Shellholder: #1 (sold separately)
- Bullet Diameter: 0.224 inch
- Material: Steel
What’s Included
- Type S Bushing Full Length Sizing Die
- Competition Bullet Seating Die
- Standard size button
- Decapping pin retainer
- Plastic storage box
Frequently Asked Questions
Does the 22-250 Type S-Match die set come with bushings?
No, the set ships without bushings so you can choose the exact neck tension your load calls for. You'll want to measure a loaded round's neck diameter and order the correct bushing in either heat-treated steel or Titanium Nitride. Bushings are available in .001 inch increments to fine tune your sizing.
What shellholder do I need for this 22-250 Remington die set?
A shellholder is not included in this set. For 22-250 Remington you'll need a #1 shellholder, which fits the case head of this cartridge. Grab one before your first loading session so you're ready to go.
Can the Type S bushing sizing die be used as a body die?
Yes. By removing the bushing and all internal parts, the Type S full length sizing die works as a body die. That gives you some extra versatility if you want to size the body and shoulder without touching the neck.
Will this Redding die set work in my press?
It should fit just about any standard reloading press. All Redding dies use the industry standard 7/8-14 threaded body, so the set threads right into common single stage and turret presses without any adapters.




Reviews
There are no reviews yet.