0
0

Redding Type S-Elite Bushing 3-Die Set 22-250 Remington

UPC: 611760601064

$276.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload the 22-250 Remington and want to wring every bit of accuracy out of your brass, the Redding Type S-Elite Bushing 3-Die Set covers just about every base. This is the top-tier Redding bushing package, built around interchangeable neck sizing bushings that let you control neck tension and diameter in exact .001-inch increments. The bushings are free-floating, so they self-center on the case neck for better concentricity, and they come in both hardened steel and TiN-coated versions (sold separately) for added lubricity and brass life.

What Comes in the Type S-Elite 22-250 Set

The set pairs three dies that each do real work. You get a Type S-Bushing Full Length Sizing Die for resizing the whole case back to spec, a Type S-Bushing Neck Sizing Die for the loads where you only want to touch the neck, and the Redding Competition Seating Die for seating bullets with precision. Both sizing dies run the same interchangeable bushings, so you can switch between full length and neck-only prep without rebuying components.

Fine-Tuning Neck Tension With the Bushing Dies

The whole point of a bushing setup is control. Instead of being locked into a fixed expander, you choose a bushing that matches your brass thickness and the neck tension you want. That means less brass working, longer case life, and more consistent seating force round after round. It is a system that rewards reloaders chasing tight groups from their 22-250, whether that is a varmint rig or a long-range setup.

Why the Competition Seating Die Matters

The Competition Seating Die is what really sets the Elite apart from a standard bushing set. Its sliding sleeve holds the bullet and case in alignment before the bullet ever starts into the neck, which cuts down on runout. The micrometer head lets you adjust and repeat seating depth to the thousandth, so dialing back to a proven load for a specific bullet is quick and repeatable. Keep in mind the Competition Seating Die ships with a standard seating stem and is not intended for compressed loads. Dies are machined from quality alloy steel on precision lathes and finished to the tight tolerances Redding is known for.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 60106
  • UPC: 611760601064
  • Caliber: 22-250 Remington
  • Bullet Diameter: 0.224
  • Die Set Type: Type S-Elite Bushing 3-Die Set
  • Number of Dies: 3
  • Dies Included: Type S-Bushing Full Length, Type S-Bushing Neck, Competition Seating
  • Neck Tension Adjustment: Interchangeable bushings in .001 inch increments
  • Seating Adjustment: Micrometer, .001 inch increments
  • Material: Alloy steel
  • Standard Shellholder: #1 (sold separately)
  • Lock Ring Thread: 7/8"-14

What’s Included

  • Type S-Bushing Full Length Sizing Die
  • Type S-Bushing Neck Sizing Die
  • Competition Seating Die with micrometer head and standard seating stem
  • Spare decapping pin
  • Hex wrench
  • Instructions
  • Die storage box that doubles as a loading block

Frequently Asked Questions

Are the neck sizing bushings included with the Type S-Elite 22-250 set?

No, bushings are sold separately so you can match them to your exact brass and desired neck tension. Both sizing dies use the same interchangeable bushings, available in hardened steel and TiN-coated options. Sizing them in .001-inch increments is what gives this set its precision.

What is the difference between the full length die and the neck sizing die in this set?

The Type S-Bushing Full Length Die resizes the entire case body, shoulder, and neck back to spec, which is handy for brass that has grown or for semi-auto feeding. The Type S-Bushing Neck Die only works the neck, which reduces brass working and extends case life. Having both in one set lets you switch your approach without buying more dies.

Does this 22-250 die set come with a shellholder?

No, the shellholder is sold separately. The 22-250 Remington uses the Redding #1 shellholder. Many reloaders already have common shellholders on hand, but it is worth adding one if you are new to the cartridge.

What makes the Competition Seating Die worth it?

It uses a sliding sleeve that aligns the bullet and case before seating begins, which cuts runout and improves consistency. The micrometer head lets you set and repeat seating depth to the thousandth of an inch. It ships with a standard seating stem and is not meant for compressed loads.

Additional information

UPC

611760601064

Manufacturer

Manufacturer Part Number

60106

Reviews

There are no reviews yet.

Be the first to review “Redding Type S-Elite Bushing 3-Die Set 22-250 Remington”