0
0

Redding Type S-Match Bushing Full Die Set 22-250 Ackley Improved

UPC: 611760364068

$249.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 22-250 Ackley Improved is a flat-shooting, high-velocity round built on a fire-formed case, and that minimal-taper, 40-degree shoulder brass deserves dies that treat it right. Redding's Type S-Match Bushing Full Die Set is the setup serious handloaders reach for when they want tack-driver consistency without beating up their brass. This two-die set includes a Type S Bushing Full Length Sizing Die and the Competition Bullet Seating Die, both machined in the USA to the tight tolerances Redding has been known for since 1946.

What the Type S Bushing Full Length Sizer Does Differently

The magic here is the interchangeable neck bushing. Instead of squeezing the neck way down and then dragging it back over an expander ball, this die sizes the outside of the neck to exactly the diameter you choose in a single, gentle operation. You pick your bushing based on your brass, and that means less working of the neck, longer case life, and better concentricity since the bushing self-centers on the case neck. In the same stroke it full length sizes the body and bumps the shoulder back so your Ackley brass chambers easy every time. You can even fine-tune how much of the neck gets sized by adjusting the decapping rod assembly.

Dialing In Neck Tension With the Competition Seating Die

The Competition Seating Die is where straight ammo comes from. A spring-loaded sliding sleeve captures and aligns the case and bullet before any seating pressure is applied, which goes a long way toward eliminating runout. The micrometer top adjusts seating depth in .001 inch increments, so finding your rifle's sweet spot on bullet jump and getting back to it is quick and repeatable.

A Few Things to Know Before You Load

Bushings are sold separately, which is by design. A good starting point is measuring the outside neck diameter of a loaded round and subtracting about .002 inch, then fine-tuning from there based on how your brass springs back. Most folks keep two or three bushings on hand to match different brass. The shellholder is also sold separately. Everything comes packaged in a Redding storage box with complete instructions.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 36406
  • UPC: 611760364068
  • Cartridge: 22-250 Remington Improved 40 (Ackley Improved)
  • Die Set Type: Type S-Match Bushing Full Die Set
  • Number of Dies: 2
  • Sizing Die: Type S Bushing Full Length Sizing Die
  • Seating Die: Competition Bullet Seating Die with micrometer
  • Seating Adjustment: Micrometer, .001 inch increments
  • Thread Size: 7/8-14
  • Bushings: Sold separately, interchangeable, .001 inch increments
  • Shellholder: Sold separately
  • Country of Origin: Made in the USA

What’s Included

  • Type S Bushing Full Length Sizing Die with decapping rod assembly
  • Competition Bullet Seating Die with micrometer seating stem
  • Redding storage box
  • Complete instructions

Frequently Asked Questions

Does the 22-250 Ackley Improved Type S die set come with bushings?

No, neck bushings are sold separately. This is intentional so you can match the bushing to your specific brass and the neck tension you want. Most handloaders keep two or three bushings on hand to cover different brass brands and load setups.

How do I pick the right bushing for this set?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .002 inch to allow for brass spring-back and proper neck tension. A bolt gun loaded from the magazine typically likes around .002 inch of tension. Because spring-back varies with brass, buying a bushing or two on either side of your target gives you room to fine-tune.

What's the difference between a Type S bushing die and a standard full length die?

A standard die sizes the neck down and then pulls it back over an expander ball to set the final diameter, which works the brass twice. The Type S bushing die sizes the neck to your exact chosen diameter in one gentle pass, so there's less stress on the brass. That means longer case life and better concentricity, while still full length sizing the body and bumping the shoulder.

Is a shellholder included with this die set?

No, the shellholder is sold separately. You'll need the correct shellholder for the 22-250 case head, which is the same as the parent 22-250 Remington. Pick one up along with your bushings to be ready to load.

Additional information

UPC

611760364068

Manufacturer

Manufacturer Part Number

36406

Reviews

There are no reviews yet.

Be the first to review “Redding Type S-Match Bushing Full Die Set 22-250 Ackley Improved”