0
0

Grace USA 20 Piece Brass Punch Set with Bench Block

UPC: 731940217295

$94.99

14 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Brass is the material of choice when you're driving pins on a firearm and you care about the finish underneath. Softer than the steel it's tapping against, it moves the pin without leaving marks on your slide, frame, or receiver. Grace USA has been building tools like this in the USA since 1941, and this 20 piece set brings together everything most gunsmithing jobs call for in a single, ready-to-grab tray.

What's in the Grace USA Brass Punch Set

The lineup covers three punch styles across the sizes you reach for most. There are eight brass pin punches (1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"), eight matching brass roll pin punches in the same size spread for driving out those tricky split roll pins, and four brass starter punches (1/16", 3/32", 1/8", 5/32") for getting a stubborn pin moving before you switch to a longer punch. Every one is machined from CDA 360 hex brass rod extruded in a mill stateside and polished to a clean finish.

Why Brass Matters for Non-Marring Work

The whole point of a brass punch is protecting what you're working on. Brass is non-marring, so it won't scar bluing, Cerakote, or bare metal, and it's non-sparking, which is worth its weight when you're around solvents or powder. Keep in mind brass is meant to be sacrificial. The punch takes the wear so your firearm doesn't, and mushroomed tips can be dressed back true on a file or stone.

The Bench Block That Ties It Together

This set ships with the Grace USA bench block holder, made from 60 durometer neoprene rubber. It resists oil and solvents, dampens vibration, and stays stable across a wide temperature range. Each punch has its own spot in the block, so you're not digging through a drawer mid-job, and the same block gives you a soft, steady surface to support small parts while you drive pins. It's a tidy setup that earns its keep on any bench.

Key Specifications

  • Manufacturer: Grace USA
  • Manufacturer Part Number: BP-20S-BB
  • UPC: 731940217295
  • Pieces: 20 punches plus bench block
  • Punch Material: CDA 360 Hex Brass Rod
  • Pin Punches: 8 (1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16")
  • Roll Pin Punches: 8 (1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16")
  • Starter Punches: 4 (1/16", 3/32", 1/8", 5/32")
  • Bench Block Material: 60 Durometer Neoprene Rubber
  • Non-Marring: Yes
  • Non-Sparking: Yes
  • Country of Origin: Made in USA

What’s Included

  • 8 brass pin punches (1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16")
  • 8 brass roll pin punches (1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16")
  • 4 brass starter punches (1/16", 3/32", 1/8", 5/32")
  • Grace USA neoprene bench block tool holder

Frequently Asked Questions

Why use brass punches instead of steel for gun work?

Brass is softer than the steel pins and firearm parts you're working on, so it drives the pin without scratching or denting your finish. It's also non-sparking, which is a nice safety plus around solvents and powder. The trade-off is that brass wears faster, but that's the whole idea. The punch takes the damage instead of your gun.

What's the difference between the pin, roll pin, and starter punches in this set?

Pin punches have a flat face for pushing solid pins all the way through. Roll pin punches have a small nub in the center that keeps the tip centered on hollow split roll pins so they don't slip or crush. Starter punches are shorter and stouter with a taper, giving you the control to break a tight pin loose before switching to a longer punch.

Does the Grace USA brass punch set come with the bench block?

Yes, the bench block is included and it's custom cut so each of the 20 punches has its own labeled spot. It's made from 60 durometer neoprene rubber that resists oil and solvents and dampens vibration. It also doubles as a soft, stable surface to rest small parts on while you drive pins.

Can I use this set on things other than firearms?

Absolutely. While it's built with gunsmithing in mind, the same non-marring brass makes it handy for jewelry work, metal fabrication, and any precision job where you don't want to scar the surface. The range of sizes from 1/16 inch up to 5/16 inch covers most small pin and fastener work you'll run into.

Additional information

UPC

731940217295

Manufacturer

Manufacturer Part Number

BP-20S-BB

Reviews

There are no reviews yet.

Be the first to review “Grace USA 20 Piece Brass Punch Set with Bench Block”