Description
This is the L.E. Wilson 2.750" Small Flashhole Neck Die Punch, part number SP-2750G, made from stainless steel right here in the USA. It's the replacement punch that works inside your Wilson neck die, and it comes with the smaller .057" ground pin meant for cartridges built around small flash holes. If you've been running a BR, PPC, or another small flash hole case and needed a fresh punch that fits correctly, this is the piece that keeps your decapping clean and repeatable.
The smaller pin diameter matters more than it might seem. A standard pin can drag or hang up on a small flash hole, and over time that leads to inconsistency you don't want in a precision load. This ground pin is matched to the tighter hole, so primers come out smooth without beating up the case or the tool.
Where the SP-2750G Earns Its Keep
Plenty of reloaders like using a Wilson punch and die to deprime brass on its own, separate from the full sizing step. That's handy when you want to clean or tumble cases with the primers already out, or when you're prepping brass ahead of time. This punch handles that job and will also push out stubborn crimped primers when you run into military brass. It's hardened and holds up to repeated use, which is what you'd expect from Wilson.
Matching the Small Flashhole Neck Die Punch to Your Brass
These punches are caliber and length specific, so the 2.750" size with the .057" pin is the combination you want for the small flash hole cartridges that call for it. Before ordering, it's worth double checking your die and case against Wilson's punch chart so the length and pin diameter line up with what you're loading. Get the right one and it drops in and goes to work with no fuss.
Built from stainless and machined to Wilson's usual standards, this is a simple part that does one thing and does it well. For anyone chasing consistency at the bench, having the correct punch on hand is one of those small details that quietly pays off.
Key Specifications
- Manufacturer: L.E. Wilson
- Manufacturer Part Number: SP-2750G
- UPC: 850067827269
- Punch Length: 2.750"
- Pin Type: .057" Ground Pin (Small Flashhole)
- Material: Stainless Steel
- Type: Replacement Neck Die Decapping Punch
- Compatibility: L.E. Wilson Neck Dies
- Country of Manufacture: United States
What’s Included
- L.E. Wilson 2.750" Small Flashhole Neck Die Punch (SP-2750G)
Frequently Asked Questions
What does the .057" pin on this small flashhole neck die punch do differently?
The .057" ground pin is a smaller diameter meant for cartridges built with small flash holes, like many BR and PPC cases. A standard pin can catch or bind on those tighter holes, so the smaller pin lets primers drop out smoothly. It keeps your decapping consistent without stressing the brass.
Is the SP-2750G punch caliber specific?
Yes, Wilson punches are matched by both length and pin size to the cartridge they're used with. This one is the 2.750" length with the small .057" pin. It's a good idea to confirm your die and case against Wilson's punch chart before ordering so the fit is correct.
Can this punch remove crimped military primers?
It can. The hardened stainless construction handles tougher crimped-in primers along with standard depriming. Many reloaders keep one around specifically for that job.
Do I need the whole die, or just this punch?
This is the replacement punch only, meant to go inside a Wilson neck die you already own. If your existing punch is worn, bent, or you need the small flash hole version, this is the part you swap in. It is not a complete die on its own.




Reviews
There are no reviews yet.