Description
This is MEC's 302 series single stage charge bar set up to throw a 1 oz payload of steel shot in the #3 through #6 size range. The charge bar is the piece that controls how much shot drops into each shell, and pairing a bar matched to both your payload weight and shot size takes the guesswork out of your steel loads. Steel shot bars and lead shot bars are not interchangeable, so if you're moving over to steel this is the right tool for the job.
How This 1 oz Steel Charge Bar Works on Your Press
The 302 series fits MEC single stage machines like the 600 Jr., Sizemaster, and Steelmaster. The bar handles the shot side of the equation while a removable powder bushing, sold separately, meters your powder charge. That split setup is what makes MEC presses so easy to tune: the bar sets your shot, the bushing sets your powder, and together they follow whatever published recipe you're working from. Because steel and lead behave differently as they flow, running a bar built for steel keeps your drops accurate and your crimps consistent.
Why Shot Size Matters With the 302 Steel Shot Bar
Steel shot charge bars are cut for a specific range of pellet sizes, and this one covers #3 through #6, which lands right in the sweet spot for a lot of duck, pheasant, and general upland work. Matching the bar to your pellet size means the cavity fills cleanly and you get the same weight drop pull after pull. If you load bigger pellets or heavier payloads, MEC offers other bars in the 302 family to cover BB down through #2 and weights up past 1-3/8 oz.
Getting the Most From Your Steel Shot Setup
Think of this bar as one building block in a dialed-in steel load. Grab the matching powder bushing for your recipe, make sure your press is configured for steel, and you've got a repeatable system for turning out your own waterfowl ammo. For folks who already shoot a fair amount of steel, loading your own is a satisfying way to keep the press busy in the off season and have shells ready when the season opens.
Key Specifications
- Manufacturer: MEC
- Manufacturer Part Number: 30210036
- UPC: 098489013291
- Series: 302 (Single Stage)
- Shot Type: Steel
- Payload Weight: 1 oz
- Shot Size Range: #3 through #6
- Press Compatibility: MEC single stage presses (600 Jr., Sizemaster, Steelmaster)
- Function: Meters the shot charge dropped into each shell
- Powder Metering: Accepts removable MEC powder bushings (sold separately)
What’s Included
- One MEC 302 series single stage steel shot charge bar (1 oz, #3-#6)
Frequently Asked Questions
Will this steel shot charge bar work with lead shot?
No. MEC steel shot bars and lead shot bars are not interchangeable because the two types of shot flow differently through the bar. This 302 series bar is cut specifically for steel shot in the 1 oz, #3 through #6 configuration, so use it only for steel loads.
Which MEC presses does the 302 charge bar fit?
The 302 series is MEC's single stage designation and works across their single stage machines, including the 600 Jr., Sizemaster, and Steelmaster. If your press is a progressive like the 650 or Grabber, you'd need a 502 series bar instead. Always match the series number to your press type.
Does the charge bar meter the powder too?
The charge bar only controls the amount of shot that drops into each shell. Powder is metered separately by a removable powder bushing that threads into the bar, and those bushings are sold separately. You pick the bushing number based on the powder and recipe you're loading.
What loads is the 1 oz #3-#6 steel bar good for?
A 1 oz steel payload in the #3 through #6 range is a versatile setup for ducks, pheasants, and a lot of general upland hunting. Matching the bar to your pellet size keeps the shot drop consistent and your crimps clean. If you want heavier payloads or larger pellets, MEC makes other 302 bars to cover those combinations.




Reviews
There are no reviews yet.