Description
A bore guide is one of those quiet little tools that saves your barrel from the thing that wears it out fastest, which isn't shooting, it's careless cleaning. The Dewey ABS-2S slides into the action in place of the bolt and gives your cleaning rod a straight, centered path into the bore. That means the rod itself never rubs the throat or the leade, and only the jag or brush touches the rifling the way it should. For anyone chasing accuracy or just trying to make a good barrel last, this is cheap insurance.
This one is built for .24 caliber through 7mm rifles and measures 13 inches overall, which is the longer length made with scoped bolt guns in mind. It fits actions with a bolt diameter in the .695 to .700 range. The tube is anodized aluminum with a solvent port so you can wet your patch right at the guide, and the adjustable locking collar with a brass pin lets you dial in the fit for different bolt lengths.
What the Dewey ABS-2S Does for Your Barrel
The O-rings up front seal against the chamber so solvent and gunk stay out of your receiver, trigger group, and magazine well. If you've ever had aggressive solvent creep down into an action, you know why that matters. Keeping fluids where they belong protects bedding and trigger components and cuts down on the rust and grime that build up over time.
Simple, Solid, and Made to Last
There's a reason Dewey has been the name serious rifle folks reach for. The whole thing is metal instead of flimsy plastic, and it's caliber specific rather than a one-size-fits-all compromise. Setup is straightforward: pull the bolt, slide the guide in, snug the collar, and clean. Once you've cleaned a rifle with a proper guide in place, going back to freehanding a rod down the chamber feels reckless. It's the kind of tool you buy once and use for the life of the rifle.
Key Specifications
- Manufacturer: Dewey
- Manufacturer Part Number: ABS-2S
- Model: 77
- UPC: 608060800143
- Caliber Range: .24 – 7mm
- Overall Length: 13 inches
- Tube Material: Anodized aluminum with solvent port
- Collar: Adjustable aluminum locking collar with brass pin
- Chamber Seal: O-rings
- Fits Bolt Diameter: .695 – .700 inch
- Finish: Black/Silver
- Best Suited For: Scoped bolt-action rifles
What’s Included
- Dewey ABS-2S 13" adjustable bore saver rod guide with O-rings and adjustable locking collar
Frequently Asked Questions
What calibers does the Dewey ABS-2S bore guide fit?
The ABS-2S is designed for rifles chambered from .24 caliber up to 7mm. It's meant for bolt-action rifles with a bolt diameter in the .695 to .700 inch range. If your rifle falls outside that caliber window, Dewey makes other guides in the same ABS series to cover smaller and larger bores.
Why should I use a bore guide instead of just running the rod through the action?
A bore guide centers the cleaning rod so it enters the bore straight, which keeps the rod from rubbing against the throat and rifling. Throat wear from careless cleaning is one of the main causes of accuracy loss over a barrel's life. The guide also seals off the chamber so solvent and debris don't run down into your trigger and action.
How long is the ABS-2S and why does the length matter?
This guide has a 13 inch overall length, which is the longer version built with scoped bolt guns in mind. The extra length adds to your total cleaning setup, so make sure your one-piece cleaning rod is long enough to clear both the guide and the muzzle. A rod that's too short won't reach through the barrel.
Does the Dewey rod guide keep solvent out of the action?
Yes. The O-rings at the front seal against the chamber to keep solvents and oils out of the receiver, magazine, and trigger group. There's also a solvent port in the tube so you can wet your patch right at the guide without making a mess inside the action.




Reviews
There are no reviews yet.