0
0

Mark 7 11″ High Speed Case Feeder Plate – Small Pistol

UPC: 011516126719

$33.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Mark 7 11" High Speed Case Feeder Plate in Small Pistol is the rotating heart of your case feeder. It spins beneath the pile of brass, stirring the cases and dropping them into its pockets. From there the pockets carry the brass up toward the top of the feeder, and if a case is sitting the right way it slides out the output chute. Any case that ends up upside down simply falls back into the pile for another go, so what reaches your press is always base-down and ready to load.

What the Small Pistol Plate Handles

This particular plate is cut for the smaller pistol cartridges, and it's recommended for 32 ACP, 380 ACP, and 9mm/38 Super. Running 30 Carbine? You'll want two of the spacer washers in the mix. If your reloading plans involve 38 Special, 357, 40 S&W, 10mm, or anything larger, that's territory for the large pistol plate instead, so match the plate to the brass you're actually loading.

Built to Keep the Feeder Running

One of the smarter touches on the Mark 7 11" case feeder plate is the slip-clutch style center core. If the plate ever binds up, the clutch lets it slip rather than stalling out the motor, which saves a lot of headaches during a long session. It comes factory adjusted and is meant to stay that way, so there's no fiddling with tension before you get going.

Fitment Notes for Your Setup

These plates are specific to the Mark 7 11" High Speed Case Feeder found on the Apex 10 and Evolution presses, which launched in 2021. It looks similar to Dillon and Hornady plates but it isn't interchangeable with them, and it's the only plate that fits this feeder. Since your Mark 7 feeder already ships with both large and small output springs and case drop tubes, the plate is usually the only piece you need to change when switching between small pistol calibers, making caliber swaps quick and painless.

Key Specifications

  • Manufacturer: Mark 7 Reloading
  • Manufacturer Part Number: 101-1267-01
  • UPC: 011516126719
  • Plate Size: Small Pistol
  • Feeder Compatibility: Mark 7 11" High Speed Case Feeder
  • Press Compatibility: Apex 10 and Evolution
  • Recommended Calibers: 32 ACP, 380 ACP, 9mm/38 Super
  • Center Core: Slip-clutch type, factory adjusted
  • Plate Diameter: 11"
  • Country of Manufacture: United States

What’s Included

  • Mark 7 11" High Speed Case Feeder Plate (Small Pistol)

Frequently Asked Questions

Which calibers does the Small Pistol case feeder plate work with?

The Small Pistol plate is recommended for 32 ACP, 380 ACP, and 9mm/38 Super. If you're feeding 30 Carbine, you'll need to add two of the spacer washers. For 38 Special, 357, 40 S&W, 10mm, or larger brass, you'll want the large pistol plate instead.

Will this plate fit my Dillon or Hornady case feeder?

No. This plate is made specifically for the Mark 7 11" High Speed Case Feeder. It looks similar to Dillon and Hornady plates but it is not identical and isn't interchangeable with them, so it only works in the Mark 7 feeder.

Do I need to adjust the slip clutch before using the Mark 7 case feeder plate?

No. The slip-clutch style center core comes factory adjusted and is designed to stay that way. It's there to let the plate slip instead of stalling the motor if the brass binds up, so you can run it right out of the box.

Is the case feeder plate the only part I need to change for a caliber swap?

In most small pistol caliber changes, yes. The Mark 7 11" High Speed Case Feeder already ships with both large and small output springs and case drop tubes, so the plate is typically the only feeder piece that needs to change. Keep in mind your press may still need its own shell plate or case feed parts depending on the caliber.

Additional information

UPC

011516126719

Manufacturer

Manufacturer Part Number

101-1267-01

Reviews

There are no reviews yet.

Be the first to review “Mark 7 11″ High Speed Case Feeder Plate – Small Pistol”