Description
This is the MEC 11/16 oz lead shot charge bar, part number 5021116, built for the 502 series progressive presses. It meters out a fixed 11/16 ounce payload of lead shot every pull of the handle, with a shot hole bored to .500 inches for that specific weight. If you load a lot of lighter target or sub-gauge rounds, a dedicated bar like this takes the guesswork out of getting a repeatable charge shell after shell.
How the MEC 502 Charge Bar Handles Your Loads
The bar is machined from anodized aluminum, which gives it a slick surface so shot flows cleanly and the bar slides without binding during the cycle. It accepts removable powder charge bushings, sold separately, so you can dial in your powder charge independently of the shot weight. That split setup is handy because the bar sets your shot payload while the bushing sets your powder, letting you tune a load without swapping the whole bar.
Why the Soft Insert Matters on This Lead Shot Bar
MEC built in a soft insert to help stop shot from shearing as the bar cycles, which matters most with larger shot sizes and harder lead. It makes for a cleaner cut-off and smoother operation over long loading sessions. One thing worth repeating: lead shot bars and steel shot bars are not interchangeable, so keep this one on your lead loads only.
Fitment for the MEC 11/16 oz Progressive Bar
This 502 designation means it drops into any MEC progressive press, including the popular 650 and Grabber machines. If you are running a single stage press instead, you would want the matching 302 series bar in the same shot weight. Pair it with the right powder bushing for your recipe and you are set to run consistent 11/16 oz loads.
Key Specifications
- Manufacturer: MEC
- Manufacturer Part Number: 5021116
- UPC: 098489013017
- Shot Weight: 11/16 oz
- Shot Type: Lead
- Series: 502 (Progressive)
- Press Compatibility: MEC Progressive Presses (650, Grabber, etc.)
- Shot Hole Diameter: .500 in
- Material: Anodized Aluminum
- Powder Bushings: Accepts removable bushings (sold separately)
What’s Included
- MEC 11/16 oz Lead Shot Charge Bar (502 Progressive)
Frequently Asked Questions
Which presses does this MEC 502 charge bar fit?
This bar carries the 502 designation, which means it works in MEC progressive presses such as the 650 and the Grabber. If you run a single stage press, you would need the 302 series bar in the same 11/16 oz weight instead.
Does the 11/16 oz charge bar include powder bushings?
No, powder bushings are sold separately. The bar sets your shot charge at 11/16 oz while the removable bushing you choose sets your powder charge, so you can tune the powder side without buying a new bar.
Can I use this lead shot bar for steel shot loads?
No. Lead shot bars and steel shot bars are not interchangeable, so this one should stay dedicated to lead loads only. If you plan to load steel, you will want a bar specifically designated for steel shot.
What is the soft insert on the MEC charge bar for?
The soft insert helps keep shot from shearing as the bar cycles, which is most noticeable with larger shot sizes and harder lead. It gives you a cleaner cut-off and smoother operation during long loading sessions.





Reviews
There are no reviews yet.