Victor Company Titan22 Precision Rimfire Stock – Ruger 10/22 Black

Description

The Victor Company Titan22 is built for folks who want to squeeze real accuracy out of their Ruger 10/22 without sending it off for a full bedding job. It's molded from an ultra-rigid engineering-grade fiberglass composite resin that gives up almost no flex, which is exactly what you want when you're chasing tight groups. Load it up on a bipod, lean into it, and the platform stays put instead of wandering around on you like a lot of factory plastic stocks tend to do.

What Makes the Titan22 Shoot

The heart of this stock is Victor's Anchor Lock System. A hardened aluminum bed up front carries the action screw, while a separate hardened aluminum rear anchor and lock screw pin the back of the receiver down solid. That nylon-tipped set screw wedges against the trigger group to pull any play out of the action, so you get a chassis-style bedding interface with no gunsmithing and no bedding compound required. The barrel channel is relieved to fully free-float heavy contours up to 1.00 inch, including integrally suppressed setups, which is the gold standard for barrel harmonics and repeatable accuracy.

Fit and Feel of the Titan 10/22 Stock

The Titan22 drops in for standard Ruger 10/22 receivers as well as aftermarket actions from Volquartsen, Kidd, and Tactical Solutions. Fit and finish come across clean and businesslike, and it weighs in right around 2 lbs 11 oz with a length of pull near 13.9 inches depending on your trigger group. The upright pistol grip puts your hand at a natural angle for good trigger control, and the elevated comb lines you up nicely behind an optic. Stipple-style texturing on the grip and forend keeps your hold locked in whether your hands are dry or sweaty, and an underhook on the forend gives you a spot to ride a sandbag.

Sling options are covered from the factory. QD flush cups are molded into both sides for a quick, quiet connection, standard swivel studs come included, and there's provision for Victor's optional mini Picatinny rail if you want to hang a bipod, light, or IR illuminator up front.