0
0

Tactical Solutions 10/22 Shock Buffer – Ruger 10/22 Bolt Buffer

UPC: 879971001961

$10.99

60 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The rear of a Ruger 10/22 receiver takes a beating every time you pull the trigger. That's because the 10/22 runs on a simple blowback action, so after each shot the bolt slams rearward and smacks a steel stop pin. Tactical Solutions built this Shock Buffer to sit right where that pin goes, using a shock-absorbing polyurethane that cushions the impact instead of letting metal bang into metal. The result is a smoother, quieter cycle and less stress passed into the aluminum receiver over thousands of rounds.

What the 10/22 Shock Buffer Actually Does

Swap out the factory bolt stop pin for this buffer and the first thing most folks notice is the sound. That sharp clack of the bolt bottoming out softens into more of a dull thud, which is a nice touch if you shoot suppressed or just spend long sessions plinking. Beyond the noise, the polyurethane takes the edge off felt recoil and cycling vibration. Over the long haul, cushioning that impact helps protect the receiver from the elongated pin holes and cracking that can show up on high-mileage 10/22s, especially ones fed a steady diet of hotter ammo.

Fitting the Tactical Solutions Buffer

Installation is about as easy as gun work gets. Field strip the rifle, drift out the steel bolt stop pin at the rear of the receiver, and press the buffer into its place. No tools beyond a punch, no fitting, no fuss. It works with the standard Ruger 10/22, the 10/22 Charger, and Tactical Solutions X-Ring rifles. Worth noting: it's built for standard .22 LR receivers, so if you're running a magnum setup you'll want to check compatibility first.

Buffers like this are considered a wear item, meaning it'll eventually need replacing after enough rounds, but that's part of the point. It takes the punishment so your receiver doesn't. For the money and the five minutes it takes to install, it's one of the easiest ways to make a 10/22 run a little cleaner and last a little longer.

Key Specifications

  • Manufacturer: Tactical Solutions
  • Model: 10/22
  • Manufacturer Part Number: FX01X01
  • UPC: 879971001961
  • Material: Shock-absorbing polyurethane
  • Type: Bolt stop pin replacement / recoil buffer
  • Fits: Ruger 10/22, 10/22 Charger, TacSol X-Ring rifles
  • Function: Cushions bolt travel, reduces felt recoil and cycling noise
  • Installation: Drop-in, no gunsmithing required

What’s Included

  • One 10/22 Shock Buffer (polyurethane bolt stop pin replacement)

Frequently Asked Questions

Is the 10/22 Shock Buffer hard to install?

Not at all. You field strip the rifle, drift out the factory steel bolt stop pin at the rear of the receiver, and press the buffer into its place. It's a five-minute job that only needs a punch, with no fitting or gunsmithing involved.

Will this Shock Buffer really make my Ruger 10/22 quieter?

It softens the sharp metallic clack the bolt makes when it bottoms out against the steel pin, turning it into more of a muffled thud. It's a subtle change on an unsuppressed rifle but a welcome one during long range sessions, and it's especially noticeable if you shoot suppressed. It also trims a bit of the cycling vibration you feel through the action.

Does the Shock Buffer fit a 10/22 Magnum?

This buffer is designed for standard .22 LR 10/22 receivers, along with the 10/22 Charger and TacSol X-Ring rifles. Magnum receivers are a different animal, so if you're running a 10/22 Magnum it's worth confirming compatibility before you install it.

How long does the buffer last before it needs replacing?

Like any polyurethane buffer, it's a wear item that takes the impact so your receiver doesn't, and it'll eventually need swapping out after enough rounds. The good news is it holds up for a lot of cycling and it's cheap and quick to replace when the time comes. If you ever run into feeding hiccups, you can always drop the factory steel pin back in to compare.

Additional information

UPC

879971001961

Manufacturer

Manufacturer Part Number

FX01X01

Model

Reviews

There are no reviews yet.

Be the first to review “Tactical Solutions 10/22 Shock Buffer – Ruger 10/22 Bolt Buffer”