$63.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
These Talley 1" Medium Satin Blue rings are a go-to for anyone who wants a scope mounted solid and sitting clean on the rifle. Built as part of Talley's Fixed Ring System, they use a vertically split design with no moving parts, so there is nothing to work loose or shift under recoil. The .400" medium height gives you good clearance for most common objective bells while keeping the optic low enough for a natural cheek weld. The satin blue finish has a classic, understated look that pairs nicely with blued steel rifles.
The Fixed Ring System grew out of Talley's quick-detachable platform and shares the same double recoil shoulder base, which is a big part of why these hold up to serious thumping. Larger clamp screws spread the clamping force evenly around the one-inch scope tube, and with no levers or detachable hardware in the mix, the whole setup stays rock-steady. Folks running magnum calibers and hot loads trust this design to keep their optic where they put it, round after round.
These are built to fit Talley bases and will not clamp to a Picatinny or Weaver rail, so make sure you are running the matching Talley base setup. The one-inch bore is sized for scopes with a 1" main tube, and the medium .400" height works well for a wide range of rimfire and centerfire optics. This exact setup is a popular match for the CZ 452 and 453 American rifles, where it drops right onto the factory dovetail.
Talley has been machining rings and bases for decades, and the reputation is earned. These rings arrive as a matched pair with the mounting hardware you need, and the fixed design keeps things simple with fewer parts to fuss over. If you want a dependable, good-looking mount that just works, this is a smart pick.
No. These fixed rings are designed to mount on Talley bases only and will not clamp onto a Picatinny or Weaver rail. If you want a ring that fits a Picatinny rail, you will need Talley's Picatinny ring line instead.
They are bored for scopes with a 1" main tube. The medium .400" height gives good clearance for most standard objective bells while keeping the optic low enough for a comfortable cheek weld.
These are fixed rings with a vertically split design and no moving parts, so there are no levers or quick-detach features. That simplicity is the point. Fewer parts means nothing to shift or loosen, which helps hold zero through heavy recoil.
Yes, this exact setup is a popular match for the CZ 452 and 453 American rifles and seats on the factory dovetail. Owners mounting rimfire scopes on those rifles have had great results with the medium height for proper eyepiece clearance.
| UPC | 876430003207 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100004 |
| Style | Specialty Scope Rings |
You must be logged in to post a review.
Reviews
There are no reviews yet.