$63.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
These are Talley's Fixed Scope Rings in 1-inch, high height, wearing a satin blue finish that pairs up nicely with a traditional blued bolt gun. If you like the clean look of a vertically split ring and you want something that locks your optic down and keeps it there, this is the setup. The high ring height measures .500 inches, giving you clearance for larger objective bells and bigger-bodied scopes without riding too tall.
The fixed ring system grew out of Talley's Quick-Detachable design, but it ditches the lever and moving parts in favor of a sleeker, non-detachable profile. Larger screws and a simpler build mean these rings are every bit as rigid as they look. They use the same double recoil shoulder base as the detachable version, so they're more than capable of standing up to hard-recoiling magnum cartridges without shifting your zero.
One thing worth knowing up front: these rings are designed to mount on a matching Talley base and do not fit a Picatinny rail. Make sure you're pairing them with the correct Talley base for your action. Assembly is straightforward using Torx screws, with the base and lower ring going on first, then the scope seated and the top screws snugged to spec. Talley calls for roughly 30 in/lbs on the base screws and 20 in/lbs on the ring caps, and because they're machined to tight tolerances, there's no lapping required to get a clean fit.
Hunters and range guys running a 1-inch tube scope on a bolt-action rifle will get the most out of these. Made in the USA and backed by Talley's long track record, they're a trusted pick for anyone who wants a dependable, good-looking mount that holds point of aim shot after shot. Sold as a pair.
No. The fixed ring system is designed to mount on a matching Talley base and does not fit a Picatinny rail. If you need rings for a Pic rail, Talley makes a separate Picatinny-style ring. Be sure to pair these with the correct Talley base for your action.
These are built for scopes with a 1-inch main tube. The high height sits at .500 inches, which gives you extra clearance for larger objective bells and bigger-bodied optics. If your scope has a 30mm tube, you'll want the 30mm version instead.
Yes. The fixed ring system uses larger screws, no moving parts, and the same double recoil shoulder base as Talley's detachable rings, so it stands up to brutal magnum recoil. It's a rigid setup designed to keep your optic locked in place and holding zero.
No lapping needed. Talley machines these to tight tolerances so they're ready to go right out of the box. Just follow the torque specs during assembly, roughly 30 in/lbs on the base screws and 20 in/lbs on the ring caps, and avoid over-tightening on your scope tube.
| UPC | 876430003214 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 100005 |
| Style | Specialty Scope Rings |
You must be logged in to post a review.
Reviews
There are no reviews yet.